CATDOLL : CATDOLL: How to correctly install the air cooler in the pig farm? Detailed installation steps of the air cooler

The importance of air coolers in pig farms

The pig farm is an environment that needs to maintain stable temperature and airflow. In the hot summer, a lot of heat will accumulate inside the pig farm, affecting the growth and breeding environment of the pigs. The installation of air coolers can effectively regulate the temperature and humidity in the pig farm and provide a good production environment.

Preparation work before installing the air cooler

• Choose the right air cooler: Choose the right air cooler based on the size of the farm, airflow requirements and equipment requirements.
• Determine the installation location: Choose a location close to the center of the pig house to ensure that the cold air can effectively cover the entire pig farm.
• Check the power supply: Make sure there is a stable power supply near the air cooler installation location to avoid affecting normal operation.
• Clean the installation area: Clear away obstacles and debris in the installation area to ensure that the ventilation effect of the air cooler is not affected.

Installation steps of air cooler

1. Mounting bracket: Select a suitable bracket according to the size and weight of the air cooler and secure it at the installation location.
2. Connect the power supply: Connect the power cord of the air cooler to a stable power source and ensure that the insulation performance of the power cord is good.
3. Install the air cooler body: Place the air cooler body on the bracket and secure it firmly with screws.
4. Connect the air duct: According to the layout and needs of the pig farm, select the appropriate air duct and connect it to the air outlet of the air cooler.
5. Debugging and testing: After turning on the power, adjust the wind speed and temperature of the air cooler and perform a test run to ensure that the air cooler is operating normally.
6. Perform maintenance and care: clean the air cooler and air duct regularly, check the operating status of the machine, and repair and replace damaged parts in a timely manner.

Things to note when installing an air cooler

• During installation, ensure that the power cord and air duct of the air cooler are not bent or pulled excessively to avoid affecting normal operation.
• Pay attention to the safety of the power supply and use waterproof plugs and sockets to reduce the risk of accidents.
• Follow the instruction manual of the air cooler and install and operate it as required.
• During installation, pay attention to personnel safety to avoid accidents.

Thank you for reading this article. I hope that through this article, you will understand the installation steps and precautions of the pig farm air cooler. Correct installation of the air cooler can provide a good temperature and airflow environment for the pig farm, promote the healthy growth of pigs, and improve breeding efficiency.