CATDOLL : CATDOLL: How to breed red worms in large quantities (how much does it cost to invest in one acre of land to breed red worms)

1. How to make red worms reproduce in large numbers?

When breeding red worms indoors, you need to provide them with suitable culture vessels. You can choose containers such as wooden barrels or glass jars that can hold a certain volume of water, then inject natural water or tap water into the container, and then place the container in the sun for exposure to allow the chlorine in the water to dissipate quickly to avoid affecting the growth of the red worms.

2. How to raise red worms?

In the process of artificial breeding, the water depth is generally maintained at about three to five centimeters. Especially in spring, when artificial breeding is carried out, the water level can be slightly lowered. This method can effectively increase the water temperature. Deepening the water level at night can effectively keep warm.

Fertile water with a steady flow can allow red worms to reproduce in large numbers. At this time, you can place the silt and red worms together in a clean glass container and use some natural pure water for breeding. If you want to use tap water for breeding, you must place them under sunlight for two or three days before using them as reasonable breeding water. Change the water in time every day and take some very good warming measures.

Red worms mainly eat organic fertilizers and like some sour and sweet feeds. Generally, they need to be fed once every three days. One mu of land should be fertilized with more than 50 kg of fertilizer each time, and a certain amount of water should be added, and then sprinkled after sufficient stirring.

3. What are the breeding techniques for red worms?

1. Breeding pond: Bloodworm breeding is generally carried out on a large scale, so a breeding pond is needed. The number of bloodworms to be put in can be determined by the size of the breeding pond, and the water depth. When breeding bloodworms, the water should not be too deep. Generally speaking, 20 to 30 centimeters is more appropriate. In addition, some silt needs to be placed at the bottom of the pond, where bloodworms like to move around.

2. Food: The main food of red worms is plankton and organic debris in the water. When the water is rich in nutrients, the growth rate of red worms will be fast. Therefore, it is best to add some fermented fertilizer to the water regularly, so that the nutrients in the water will be richer. 3. Water quality: It is more appropriate to use river water or pond water to breed red worms, because such water is closer to the native environment of red worms, but tap water is more convenient. But don't use tap water directly. It is best to expose them to the sun for two or three days and wait until the chlorine in them is basically removed before using them. Red worms do not have high requirements for water quality, but water quality is closely related to dissolved oxygen, so water changes must also be done well.

4. How to breed red worms for fishing?

How to cultivate bloodworms for fish feeding:

1. Red worms like to live in fertile water with slow flow. Late spring and early autumn every year is the season when red worms reproduce in large numbers. They float on the water surface, often making the water surface brown-red. This is an excellent opportunity to collect red worms.

2. When breeding a small amount of bloodworms at home, you can take the river pond sludge together with the bloodworms and put them in a basin or glass container. It is best to soak them with river water. If you use tap water for breeding, you should dry the tap water for 2 to 3 days in advance to remove bleach and other substances. Change the water every other day. In winter, you need to prevent freezing and put a wet red cloth on the container to keep it moist.

3. It is best to use a container with a larger area in contact with the air, because the red worms will float to the water surface and make breathing-like movements, so if there are too many of them, some of them may not be able to compete for a position and die.

4. Light source is necessary for raising red worms. The light source cannot be turned off at night. You can use a small light source (such as a 5w night light, etc.) at night. Because red worms are too lazy to breathe, if there is no light source, they will die easily the next day.

5. There are specialized breeding farms, most of which ferment rice bran, sawdust, banana peels, bagasse, sludge, pigeon droppings, etc. to make breeding feed. For home breeding of red worms, you can use yeast powder soaked in water to feed them, but the amount must be controlled.

6. When the number of red worms increases, they should be collected and dried in time. In late autumn and winter, the reproduction capacity of red worms is greatly weakened. In winter, when you can't see the red worms in the water tank, don't pour out the water in the tank, because they are hiding in the green algae. You can put the water tank in a sunny room or near the radiator. In spring, when the indoor temperature rises, the red worms come out again. When the room temperature rises to above 28℃, the red worms begin to reproduce in large numbers.

5. What is the best way to raise red worms?

1. Breeding conditions: Red worms like to live in micro-flowing fertile water. Artificial breeding must meet this condition. They will reproduce in large numbers in late spring and early autumn. They must be collected in containers. It is best to raise them with natural water and take anti-cold measures when the temperature is low.

2. Control the light source: Red worms like light, so the lights should not be turned off at night, otherwise they will easily die.

3. Water quality control: The water level can be slightly shallower during the day to increase the water temperature, and the water level can be deepened at night.

4. Feeding bait: Ferment rice bran, silt, pigeon droppings, sawdust, etc. into feed.

6. What are the methods and techniques for large-scale breeding of red worms?

1. Breeding pond: Bloodworm breeding is generally carried out on a large scale, so a breeding pond is needed. The number of bloodworms to be put in can be determined by the size of the breeding pond, and the water depth. When breeding bloodworms, the water should not be too deep. Generally speaking, 20 to 30 centimeters is more appropriate. In addition, some silt needs to be placed at the bottom of the pond, where bloodworms like to move around.

2. Food: The main food of red worms is plankton and organic debris in the water. When the water is rich in nutrients, the growth rate of red worms will be fast. Therefore, it is best to add some fermented fertilizer to the water regularly, so that the nutrients in the water will be richer.

3. Water quality: It is more appropriate to use river water or pond water to breed red worms, because such water is closer to the native environment of red worms, but tap water is more convenient. But do not use tap water directly. It is best to expose it to the sun for two or three days to remove the chlorine in it before using it. Red worms do not have high requirements for water quality, but water quality is closely related to dissolved oxygen, so water changes must also be done.