CATDOLL : CATDOLL: What are the dimensions of a bee hive (how many inches does a bee hive measure)

CATDOLL: What are the dimensions of a bee hive (how many inches does a bee hive measure)

1. What is the size of a beehive?

The ten-frame standard beehive is the Italian standard beehive, also known as the Lang's beehive or standard beehive. It is the most commonly used beehive at home and abroad. It is composed of a box cover, a sub-cover, a nest box and a super box, a box bottom, a nest door stop, a nest hinge, a partition and a clarion board, and a queen excluder. (1) Box cover. Also known as the big cover, it is made of a 15-20 mm thick wooden board frame, with a 15 mm thick top board nailed to the frame. The frame is 75 mm high, and the inner circumference of the box cover is 516 mm long and 430 mm wide. (2) Sub-cover. It is made of several wooden boards with a thickness of 10 mm. The length and width are the same as the outer dimensions of the box body, that is, 487 mm × 424 mm. The surroundings of the sub-cover can also be made into a wooden frame, and the iron mesh in the middle replaces the wooden board to make an iron mesh sub-cover. (3) Nest box. The four walls of the box body are 22 mm thick, and the inner circumference is 465 mm long, 380 mm wide, and 245 mm high. (4) Super box. Each of the four walls is 22 mm thick, and the inner dimensions are 465 mm long, 380 mm wide, and 243 mm high. (5) Bottom. The movable bottom is made of three bottom edges on the left, right, and back sides and several bottom boards; the bottom edge height is 54 mm, and the bottom board thickness is 22 mm. The two sides of the bottom are of different depths: one side has a bottom edge height of 22 mm, for use in summer or hot weather; the other side has a bottom edge height of 10 mm, for use in winter and when the weather is not hot. The bottom is 590 mm long and 424 mm wide. (6) Nest door stop. When a movable bottom is used, the nest door stop is a 22 mm × 22 mm square strip of wood. On one side of the square strip of wood is a large nest door with a height of 9 mm and a width of 165 mm; on the other side is a small nest door with a height of 8 mm and a width of 50 mm. When a fixed bottom is used, the nest door stop is a wooden strip with a thickness of 10 mm, a height of 10 mm, and a length of 380 mm. (7) Nest hinge. It is a rectangular frame that supports and fixes the honeycomb. The outer dimensions of the nest frame are 448 mm long and 232 mm high. The inner dimensions are 428 mm long and 202 mm high. The upper beam of the nest frame is 480 mm long, 27 mm wide and 20 mm thick. After the two side bars are installed, frame ears with a length of 16 mm, a width of 20 mm and a thickness of 10 mm are left at both ends. (8) Partition board. Made of one or more thin plates, 10 mm thick, with the same length and width as the nest frame.

2. What are the dimensions of a standard Chinese honey bee hive?

Standard ten-frame beehive - Specifications: (length × width × height) hive outer dimensions 41cm × 51cm × 26cm hive inner dimensions 37cm × 47cm × 26cm hive cover dimensions 45cm × 55cm × 8cm

3. What is the best size for a beehive?

The ten-frame standard beehive is the Italian honey bee standard beehive, also known as the Lang's beehive or the standard beehive. It is the most commonly used beehive at home and abroad. It is composed of a box cover, sub-cover, nest box and super box, box bottom, nest door stop, nest hinge, partitions and explanation boards, queen excluder and other parts.

(1) Lid. Also called the big lid, it is made of a 15-20 mm thick wooden board frame with a 15 mm thick top board nailed to the frame. The frame is 75 mm high. The inner circumference of the lid is 516 mm long and 430 mm wide.

(2) Sub-cover. It is made of several wooden boards, 10 mm thick, with the same length and width as the outer dimensions of the box body, i.e.

487 mm × 424 mm. The surroundings of the auxiliary cover can also be made into a wooden frame, and the iron mesh in the middle replaces the wooden board to make an iron mesh auxiliary cover.

(3) Nest box. The four walls of the box are 22 mm thick, and the inner dimensions are 465 mm long, 380 mm wide and 245 mm high.

(4) Relay box. The four walls are 22 mm thick, and the inner dimensions are 465 mm long, 380 mm wide, and 243 mm high.

(5) Box bottom. The movable box bottom is made of three bottom edges on the left, right and back and several bottom boards; the bottom edge height is 54

The bottom of the box is 590 mm long and 424 mm wide.

(6) Nest door stop. When a movable box bottom is used, the nest door stop is a 22 mm × 22 mm square wood strip. On one side of the square wood strip is a large nest door with a height of 9 mm and a width of 165 mm; on the other side is a small nest door with a height of 8 mm and a width of 50 mm. When a fixed box bottom is used, the nest door stop is a wooden strip with a thickness of 10 mm, a height of 10 mm and a length of 380 mm.

(7) Nest hinge. It is a rectangular frame that supports and fixes the honeycomb. The outer dimensions of the nest frame are 448 mm long and 232 mm high. The inner dimensions are 428 mm long and 202 mm high. The upper beam of the nest frame is 480 mm long, 27 mm wide and 20 mm thick. After installing the two side bars, there is a 16 mm long and 20 mm wide space at both ends.

mm, frame ears 10 mm thick.

(8) Partition board: Made of one or several thin boards, 10 mm thick, with the same length and width as the nest frame.

(9) Gate. This is a board used to separate beehives. It is 480 mm long, the same height as the beehive, and about 10 mm thick.

(l0) Queen Isolator. It is divided into two types: flat queen isolater and frame queen isolater. The outer dimensions of the flat queen isolater are the same as those of the box body, with a frame width of 30 mm and a plate thickness of 12 mm. The outer dimensions of the frame queen isolater are the same as those of the gate plate, with a frame width of 20 mm and a plate thickness of 12 mm.

4. What are the standard beehive and nest frame sizes?

The standard Chinese bee hive consists of a nest box with 10 nest frames, a shallow super with 10 super frames, a sub-cover, a box cover, etc.

Nest box: inner circumference length 440 mm, width 370 mm, height 270 mm, board thickness 20 mm.

Nest frame: The outer perimeter is 420 mm long and 250 mm high. The upper beam is 25 mm wide, 20 mm thick, 456 mm long, and the frame ear is 28 mm long. The side strip is 240 mm long, 25 mm wide, and 10 mm thick. The lower beam is 400 mm long, 15 mm wide, and 10 mm thick.

Shallow relay box and relay box frame: inner perimeter length 440 mm, width 370 mm, height 135 mm, plate thickness 20 mm. Shallow relay box frame outer perimeter length 420 mm, height 125 mm. Upper beam thickness 15 mm, length 456 mm, width 25 mm.

Auxiliary cover: There are two types: plate cover and iron mesh cover, the size is consistent with the outer size of the box. Box cover: inner circumference length 490 mm, width 420 mm, side height 85 mm, plate thickness 15 mm.

5. What is the maximum size of a Chinese beehive?

The maximum sizes are as follows:

1. Nest box: The inner circumference of the nest box is 440 mm long, 370 mm wide, 270 mm high, and the board thickness is 20 mm. A shallow groove 12 mm wide and 3 mm deep is left in the center of the inner surface of the front and rear walls. There are two notches 120 mm long and 20 mm wide on the lower edge of the front wall. The upper edge of the entire box is protected by a 20 mm widened, 25 mm high protective strip.

2. Nest frame: The outer perimeter of the nest frame is 420 mm long and 250 mm high. The upper beam is 25 mm wide, 20 mm thick, and 456 mm long. The frame ear is 28 mm long. The side strip is 240 mm long, 25 mm wide, and 10 mm thick. The lower beam is 400 mm long, 15 mm wide, and 10 mm thick.

3. Shallow super: The inner circumference of the shallow super is 135 mm high, 370 mm wide, 440 mm long, and the board thickness is 20 mm. The outer perimeter of the nest frame is 420 mm long and 125 mm high. The upper beam is 15 mm thick, 456 mm long, and 25 mm wide. It can be flexibly adopted according to the strength of the colony.

4. Auxiliary cover: The size of the auxiliary cover is consistent with the outer size of the box. Due to different materials, it can be divided into wooden cover and iron mesh cover.

5. Box cover: The inner circumference of the box cover is 490 mm long, 420 mm wide, 85 mm high and 15 mm thick. A wooden board 40 mm long, 20 mm wide and thick is nailed to the four corners. Galvanized iron sheet or tarpaulin is nailed on it. There are two tongue-shaped vents on each side, 100 mm long and 20 mm high.

6. What is the size and location of the beehive outlet?

1. Single Queen Box: One box of bees has one queen bee, which is a single queen colony. Generally, Lang's hive is used. The entrance and exit of the bees are at the bottom of the front of the beehive, above the bottom of the beehive. The size of the beehive door is 38cm in length and 2cm in height.

The length of the hive mouth is determined by the inner diameter of the hive. It faces the sun and helps bees identify the hive location, collect nectar and clean the hive. There is a baffle at the hive door. The size of the hive door can be adjusted at any time according to the season and the outside temperature, which is conducive to the reproduction of bees.

2. Double-queen box: As the name suggests, there are two queen bees in one beehive, separated by a dead partition in the middle. There is a bee colony on each side, and each has a queen bee. The difference from the single-queen box is that the door of the beehive is partitioned in the middle and divided into two doors, one on the left and one on the right.

7. What is the optimal size for Chinese bee barrel hives?

1. Nest box: 440 mm long, 370 mm wide, 270 mm high. 2. Nest frame: 420 mm long, 250 mm high, upper beam 25 mm wide, 20 mm thick, 456 mm long. 3. Shallow super box: about 135 mm high, 370 mm wide, 440 mm long. 4. The size of the sub-cover of the beehive is the same as the outer size of the box. 5. The inner circumference of the box cover: 490 mm, 420 mm wide, 85 mm high.

1. What is the most suitable size for native beehives?

1. Generally speaking, the inner circumference of the nest box is 440 mm in length, 370 mm in width, 270 mm in height, and about 20 mm in thickness. A shallow groove 12 mm wide and 3 mm deep is left in the central part of the inner surface of the front and rear walls, and two notches 120 mm long and 20 mm wide are left on the lower edge of the front wall. The upper edge of the entire outer box is widened by a protective strip of about 20 mm and 25 mm high.

2. Generally speaking, the outer periphery of the nest frame is 420 mm long, 250 mm high, the upper beam is 25 mm wide, 20 mm thick, and 456 mm long. In addition, the frame ear is 28 mm long, the side strip is 240 mm long, 25 mm wide, and 10 mm thick, and the lower beam is 400 mm long, 15 mm wide, and 10 mm thick.

3. Generally speaking, the inner circumference of the shallow super is about 135 mm high, 370 mm wide, 440 mm long, and 20 mm thick. In addition, the outer perimeter of the nest frame is 420 mm long, 125 mm high, and the upper beam is 15 mm thick, 456 mm long, and 25 mm wide. It can be flexibly adopted according to the growth of the Chinese bees.

4. Generally speaking, the size of the beehive sub-cover is the same as the outer size of the hive body, and the materials used are wooden cover and iron mesh cover.

5. Generally speaking, the inner circumference of the beehive lid is about 490 mm long, 420 mm wide, 85 mm high and 15 mm thick. A wooden board 40 mm long, 20 mm wide and thick is nailed to the four corners inside. Galvanized iron sheet or tarpaulin is nailed on the top. There are also two tongue-shaped vents about 100 mm long and 20 mm high on each side.

2. What is the appropriate temperature in the beehive?

1. In some places, the temperature is high, the queen bee will stop laying eggs, and there will be no bee larvae in the bee colony. But in some places, even if the temperature is high, the queen bee can still lay eggs, and there will be larvae in the bee colony. Therefore, the suitable temperature of the beehive needs to be determined according to the actual situation of the bee colony.

2. In a bee colony with larvae, the central temperature of the colony remains basically unchanged, approximately between 34.4℃ and 34.8℃. The temperature where there are young bees generally remains between 32-35℃. In the periphery of the hive where there are no bee larvae, the temperature generally remains above 20℃.

3. When there are no larvae in the bee colony, temperature control is generally not strict. At this time, the temperature of the bee colony will generally change with the external temperature and will generally be maintained between 14-32°C.

8. What are the dimensions of a standard beehive?

The ten-frame standard beehive is the Italian honey bee standard beehive, also known as the Lang's beehive or the standard beehive. It is the most commonly used beehive at home and abroad. It is composed of a box cover, sub-cover, nest box and super box, box bottom, nest door stop, nest hinge, partitions and explanation boards, queen excluder and other parts.

(1) Lid. Also called the big lid, it is made of a 15-20 mm thick wooden board frame with a 15 mm thick top board nailed to the frame. The frame is 75 mm high. The inner circumference of the lid is 516 mm long and 430 mm wide.

(2) Sub-cover. It is made of several wooden boards, 10 mm thick, with the same length and width as the outer dimensions of the box body, i.e.

487 mm × 424 mm. The surroundings of the auxiliary cover can also be made into a wooden frame, and the iron mesh in the middle replaces the wooden board to make an iron mesh auxiliary cover.

(3) Nest box. The four walls of the box are 22 mm thick, and the inner dimensions are 465 mm long, 380 mm wide and 245 mm high.

(4) Relay box. The four walls are 22 mm thick, and the inner dimensions are 465 mm long, 380 mm wide, and 243 mm high.

(5) Box bottom. The movable box bottom is made of three bottom edges on the left, right and back and several bottom boards; the bottom edge height is 54

The bottom of the box is 590 mm long and 424 mm wide.

(6) Nest door stop. When a movable box bottom is used, the nest door stop is a 22 mm × 22 mm square wood strip. On one side of the square wood strip is a large nest door with a height of 9 mm and a width of 165 mm; on the other side is a small nest door with a height of 8 mm and a width of 50 mm. When a fixed box bottom is used, the nest door stop is a wooden strip with a thickness of 10 mm, a height of 10 mm and a length of 380 mm.

(7) Nest hinge. It is a rectangular frame that supports and fixes the honeycomb. The outer dimensions of the nest frame are 448 mm long and 232 mm high. The inner dimensions are 428 mm long and 202 mm high. The upper beam of the nest frame is 480 mm long, 27 mm wide and 20 mm thick. After installing the two side bars, there is a 16 mm long and 20 mm wide space at both ends.

mm, frame ears 10 mm thick.

(8) Partition board: Made of one or several thin boards, 10 mm thick, with the same length and width as the nest frame.

(9) Gate. This is a board used to separate beehives. It is 480 mm long, the same height as the beehive, and about 10 mm thick.

(l0) Queen Isolator. It is divided into two types: flat queen isolater and frame queen isolater. The outer dimensions of the flat queen isolater are the same as those of the box body, with a frame width of 30 mm and a plate thickness of 12 mm. The outer dimensions of the frame queen isolater are the same as those of the gate plate, with a frame width of 20 mm and a plate thickness of 12 mm.

9. What are the general dimensions of a beehive?

The inner circumference of the nest box is 440 mm long, 370 mm wide, 270 mm high, and 20 mm thick. There is a shallow groove 12 mm wide and 3 mm deep in the center of the inner surface of the front and rear walls. There are two notches 120 mm long and 20 mm wide on the lower edge of the front wall. The upper edge of the entire box is protected by a 20 mm wide, 25 mm high protective strip.

10. What is the standard size of a beehive?

Dimensions of various standard beehives

This standard is applicable to the breeding of Chinese honey bees (abbreviated as Chinese bees) throughout the country.

1. Structure and specifications of the ten-frame standard beehive

The ten-frame standard beehive of Chinese bees consists of nest box, shallow super box, auxiliary cover and box cover. The size specifications of each part are as follows:

1.1 Nesting Box

The inner perimeter is 440mm long, 370mm wide, 270mm high, and 20mm thick. There are 3 to 5 round hole nest doors at the lower back of the two walls. A shallow groove with a width of 12mm and a depth of 3mm is left in the center of the inner surface of the front and rear walls for the insertion of the isolation board. There are two gaps with a length of 120mm and a width of 20mm on the lower edge of the front wall. A nest door board with a length of 386mm, a height of 50mm, and a thickness of 15mm is inserted in the front. There are 10 round hole nest doors on one side of the board, and two tongue-shaped nest doors with a length of 60mm and a height of 10mm on the other side. There are two 80mmXllomm iron screens on the upper part of the rear wall, and each has a 100mm wide wooden board that can be moved left and right for opening and closing. A protective strip is added to the upper edge of the outer periphery of the entire box, with a width of 20mm and a height of 25mm.

1.2 Nesting frame

The outer perimeter is 420mm long and 250mm high. The upper beam is 25mm wide, 20mm thick, 456mm long, the frame ear is 28mm long, the side strip is 240mm long, 25mm wide, and 10mm thick. The lower beam is 400mm long, 15mm wide, and 10mm thick. There is no nest foundation groove on the bottom of the upper beam, and the size of the partition is consistent with the outer perimeter of the nest frame.

1.3 Shallow relay box

The inner circumference is 135mm high, 370mm wide, 440mm long, and 20mm thick. The outer circumference of the shallow super box nest frame is 420mm long and 125mm high. The upper beam is 15mm thick, 456mm long, and 25mm wide (local areas can flexibly adopt it according to the group situation).

1.4 Sub-cover

There are two types: plate cover and wire mesh cover, and their sizes are consistent with the outer dimensions of the box. The plate cover consists of two parts, A and B.

1.5 Box cover

The inner circumference is 490mm long, 420mm wide, 85mm high, and 15mm thick. A 40mm long, 20mm wide and thick wooden board is nailed to the four corners of the inside of the box cover. Or a 420mm long, 20mm wide and thick wooden strip is nailed to the front and back. The box cover is floated on the auxiliary cover. Galvanized iron sheets or linoleum are nailed on the top of the box cover. There are two tongue-shaped vents on each side, 100mm long and 20mm high.

2.2 Technical requirements

a. The wood used must be dried to prevent deformation.

b. Standard beehives should be painted white after processing.

c. The wood used can be replaced by paulownia or similar wood.

2.3 Box cover

a. The box cover should be flat and not twisted or distorted.

b. If conditions permit, measure and nail a layer of 0.30mm thick tinplate on the box cover.

c. The four tongue-shaped holes should be symmetrical and the tongue-shaped nest door should be able to rotate flexibly.

d. The sides of the box are mortise-jointed, with a mortise size of 15X15, and the top board and wooden strips are nailed together with 3/2-inch nails.

2.4 Sub-cover

a. The wood should be dried and made flat without warping.

b. De-edging

2.5 Gauze Cover

a. The wood should be dried.

b. The production should be flat and not warp, and the four frames should be nailed together with iron nails.

c. The wire mesh is fixed with 360×10×10 and 450×10×10 wooden strips using iron nails.

2.6 Shallow super box nest frame

a. The nest frame should move smoothly and without obstruction when placed in the super box.

b. The four frames are nailed together.

2.7 Shallow relay box

a. Fix the iron strips of the nest frame with iron nails.

2.9 Nesting Box

a. The groove for placing the partition should be smooth and flat.

b. The groove for placing the screen pull plate should be smooth and flat.

c. Fix the iron strips of the nest frame with iron nails.

d. The wire mesh is fixed with 245×15×10, 80×15×10 wooden strips and iron nails.

e. The tenon size of the nest box is 20×20.

2.10 Nesting boxes and frames

a. The nest frame should move smoothly when placed in the nest box.

b. The four frames are nailed together.

2.11 Nest door panel

a. The valve with two tongue-shaped holes should rotate flexibly.

b. The nest door panel should be flat and free of warping to ensure smooth placement into the nest box.

2.12 Screen pull plate

a.Chamfered edge.

b. The pull board should be able to be pulled freely when placed into the nest box.

2.13 Nest box partition

a.Chamfered edge.

This standard was drafted by the Chinese Bee Standard Box Research Collaboration Group of the Beekeeping Research Institute of the Chinese Academy of Agricultural Sciences.

The main drafters of this standard are Yang Guanhuang, Duan Jinning, Wu Yongzhong and Xiao Hongliang.

The Institute of Apiculture, Chinese Academy of Agricultural Sciences is entrusted with the responsibility for interpreting this standard.

<<:  CATDOLL: How to write about the technical aspects of silkworm breeding (How to write about the technical aspects of silkworm breeding)

>>:  CATDOLL: How many trees should be planted per acre to raise cicadas? (How many trees should be planted per acre to raise cicadas?)

Recommend

CATDOLL: How are the vaccination sites for pigs determined?

How are the vaccination sites for pigs determined...

CATDOLL: How to write the word bee in honey

1. How to write the word "bee" in honey...

CATDOLL: Origin and season of Chinese round field snails

Origin and production season of Chinese round fie...

CATDOLL: How to raise fireflies best (how to raise fireflies best)

1. How to raise fireflies at home? Firefly breedi...

Does cat deworming medicine need to be fed on an empty stomach?

Cats do not need to be fed on an empty stomach to...

CATDOLL: The background of writing The Lady of the Camellias

Background of The Lady of the Camellias The Itali...

How to clean cat's eye mucus?

How to clean cat eye mucus: 1. If the cat's e...

CATDOLL: What to do if your cat has fleas? Cat flea removal tips

The easiest way to get rid of fleas on cats Metho...

Sow farrowing: correct operation steps and care methods

Preparation for farrowing Before sows give birth,...