CATDOLL : CATDOLL: How to grow the red worms you bought faster (How to grow the red worms you bought faster)

1. How to raise red worms in foam boxes?

The method of raising red worms is as follows:

1. Prepare a foam box. 2. Dig some topsoil, get a burnt coal ball, crush it, and mix it in the soil, so that the soil is not easy to harden. 3. Buy one or two bags of red worms and throw them directly into the soil. 4. You can put some porridge in it, or knead dry rice into a ball and put it in the box and cover it with soil. The best thing is watermelon, cantaloupe peel or other fruit peels and leftovers. You can put them in. The peel should be facing up with the smooth side and the flesh facing down. 5. Put the box in a dark, slightly humid place, avoid direct sunlight.

2. What is the simplest way to raise red worms?

1. Pool and density: When breeding red worms artificially, the number is generally large, and breeding them on a large scale is very common. The first thing to pay attention to is the breeding pool and density. You can use a cement pool to breed red worms. The water depth can be controlled at 20-30 cm. It does not need to be too deep. Some silt can be placed at the bottom of the pool. The number of red worms should not be too large, otherwise the dissolved oxygen in the water will be insufficient, and there will be insufficient food.

2. Food: There are many kinds of food that red worms can eat. Some red worms only eat meat, while others are omnivorous and can eat both meat and vegetarian food. Even some bacteria can become their food. If you are breeding red worms artificially, you can also add some glucose to the water, which will help the red worms grow better.

3. Water temperature: When breeding red worms, you need to pay special attention to the water temperature, because the water temperature has a relatively large impact on the growth and development of red worms. Red worms are more afraid of heat, but not too afraid of cold, so the water temperature can be kept at around 10 degrees, or even more than 10 degrees. When the temperature is suitable, the growth and reproduction speed of red worms are relatively fast.

4. Water change: When breeding red worms, you must pay attention to water changes, otherwise the water quality will be poor and the dissolved oxygen content will be insufficient. The specific frequency of water changes can be determined according to the state of the water in the pool, and the water quality in the pool can be monitored in real time.

5. Light: Red worms do not like strong light, so try to keep the pool in a darker state. If there is strong light during the day, it is recommended to cover it in time.

3. How to breed red worms?

Step/Method 1

When breeding red worms, prepare a glass container, put the selected red worms into it, and then inject clean and sterile natural water. If you want to use tap water for breeding, it is best to expose the tap water to the sun for 2-3 days to remove the chlorine in it to prevent poor growth of the red worms.

Step/Method 2

Control light source

The growth of red worms cannot be separated from light. Lack of light source will cause the red worms to have difficulty breathing and suffocate to death. When breeding, it is best to hang a 5-watt light bulb above the container to provide the red worms with sufficient light, allowing them to breathe freely and grow healthily.

Step/Method 3

Water quality control

When breeding red worms, the water should be changed once a day to keep the water clean. In the process of changing the water, the red worms and the container should be cleaned to remove the mucus to avoid the breeding of bacteria. The breeding water depth should be controlled at about 3-5 cm, and the water level should be deepened at night to keep warm.

Step/Method 4

Feeding. Red worms mainly feed on organic debris in the soil, and they particularly like sweet and acidic baits. Poultry manure, domestic sewage, etc. are all their baits. In professional farms, rice bran, sawdust, sludge, pigeon manure and other raw materials are generally fermented to make feed. If it is a family farm, yeast powder can be soaked in water and fed. Feeding is also a key point in red worm production. Feeding in small amounts and multiple times can increase production. Generally, feeding is done once every 3-4 days, and 50 to 100 kilograms of manure is fed per mu each time. It is mixed with water and sprinkled throughout the pond. When feeding, pay attention to the amount of residual bait, and do not blindly feed more, so as to avoid excessive organic matter in the water body causing fermentation to produce toxic substances, affecting production.

4. How to feed fish with red worms to make them grow faster?

First, wash the red worms thoroughly, and wash them back and forth about 10 times. On the one hand, it is to generally clean the impurities on the surface, and on the other hand, it allows the waste to be discharged from the body. There is also another way of saying that it is to put the red worms in clean water for 4 hours before taking them out. Although the methods are different, the actual effect is similar.

The second step is to pick out the dead insects and soak the rest in high-concentration potassium permanganate for about half an hour, and wash it back and forth several times to ensure that the potassium permanganate is basically diluted.

The third step is to add vitamin B12 to the water used to soak the red worms. Soak them for about an hour, then take them out and put them in the refrigerator.

The above three steps are not strict templates. For example, salt can be added directly in the cleaning process in the first step; the disinfectant in the second step can be replaced with a combination of yellow powder and salt. In short, as long as it can remove the bacteria and parasites on the red worms, it will be fine.

5. What is the fastest way to breed red worms?

1. Red worms like to live in fertile water with slow flow. Late spring and early autumn every year is the season when red worms reproduce in large numbers. They float on the water surface, often making the water surface brown-red. This is a great opportunity for us to collect red worms.

2. When breeding a small amount of red worms at home, you can take the river pond sludge together with the red worms and put them in a basin or glass container. It is best to soak them with river water. If you use tap water for breeding, you should dry the tap water for 2 to 3 days in advance to remove bleach and other substances. Change the water every other day. In winter, you need to prevent freezing and put a wet red cloth on the container to keep it moist.

3. It is best to use a container with a larger area in contact with the air, because the red worms will float to the water surface and make breathing-like movements, so if there are too many of them, some of them may not be able to compete for a position and die.

4. Light source is necessary for raising red worms. The light source cannot be turned off at night. You can use a small light source (such as a 5w night light, etc.) at night. Because red worms are too lazy to breathe, if there is no light source, they will die easily the next day.

5. There are specialized breeding farms, most of which ferment rice bran, sawdust, banana peel, bagasse, sludge, pigeon manure, etc. to make breeding feed. For home breeding of red worms, you can use yeast powder soaked in water to feed them, but the amount must be controlled.

6. When the number of red worms increases, they should be collected and dried in time. In late autumn and winter, the reproduction capacity of red worms is greatly weakened. In winter, when the red worms are not seen in the water tank, do not pour out the water in the tank, because they are hiding in the green algae. We can put the water tank in a sunny room or near the radiator. In spring, when the indoor temperature rises, the red worms come out again. When the room temperature rises above 28℃, the red worms begin to reproduce in large numbers.

6. What are the breeding techniques for red worms?

1. Breeding pond: Bloodworm breeding is generally carried out on a large scale, so a breeding pond is needed. The number of bloodworms to be put in can be determined by the size of the breeding pond, and the water depth. When breeding bloodworms, the water should not be too deep. Generally speaking, 20 to 30 centimeters is more appropriate. In addition, some silt needs to be placed at the bottom of the pond, where bloodworms like to move around.

2. Food: The main food of red worms is plankton and organic debris in the water. When the water is rich in nutrients, the growth rate of red worms will be fast. Therefore, it is best to add some fermented fertilizer to the water regularly, so that the nutrients in the water will be richer. 3. Water quality: It is more appropriate to use river water or pond water to breed red worms, because such water is closer to the native environment of red worms, but tap water is more convenient. But don't use tap water directly. It is best to expose them to the sun for two or three days and wait until the chlorine in them is basically removed before using them. Red worms do not have high requirements for water quality, but water quality is closely related to dissolved oxygen, so water changes must also be done well.

7. What is the easiest way to raise red worms?

There are many ways to raise red worms. Here I share a simple and practical method of raising red worms using a flower pot.

1. Put a round sponge at the bottom of the flower pot (wet the sponge in water first), put some soil for raising earthworms on the sponge, sprinkle some water on the soil and mix well, not too much water. Spread the purchased red worms on the soil. Get a sponge about 2 cm thick that is as big as the mouth of the flower pot, soak it in water and squeeze it with both hands to make sure there is not too much water in the sponge, and cover the red worms.

2. Place the flower pot in a plastic basin and add three centimeters of water to the plastic basin.

3. Place the plastic basin in a cool and ventilated place, and avoid exposure to the sun; add some water to the plastic basin regularly to keep the water three centimeters deep. In this way, the water in the plastic basin can continuously seep into the bottom of the flower pot, then seep into the sponge at the bottom of the pot, and then seep into the nearby soil through the sponge, so that the soil is always moist, and the red worms can not only survive, but also absorb nutrients in the soil to grow. Regularly soak the sponge covering the red worms in water, squeeze out excess water, and then cover it. When it freezes in winter, place the plastic basin in a non-freezing place indoors to prevent the red worms from freezing to death, and do not cover the flower pot tightly without ventilation to suffocate the red worms.

8. How to raise the red worms you bought?

First, red worms can be placed in clean purified water, but never use tap water!

Second, you can use an apple, cut it in half, dig a hole on one side, put the red worm inside, and then buckle it up!

Third, you can use radishes the same way you would apples!

9. What is the best way to raise red worms?

1. Breeding conditions: Red worms like to live in micro-flowing fertile water. Artificial breeding must meet this condition. They will reproduce in large numbers in late spring and early autumn. They must be collected in containers. It is best to raise them with natural water and take anti-cold measures when the temperature is low.

2. Control the light source: Red worms like light, so the lights should not be turned off at night, otherwise they will easily die.

3. Water quality control: The water level can be slightly shallower during the day to increase the water temperature, and the water level can be deepened at night.

4. Feeding bait: Ferment rice bran, silt, pigeon droppings, sawdust, etc. into feed.