1. What is the best way to raise red worms?1. Breeding conditions: Red worms like to live in micro-flowing fertile water. Artificial breeding must meet this condition. They will reproduce in large numbers in late spring and early autumn. They must be collected in containers. It is best to raise them with natural water and take anti-cold measures when the temperature is low. 2. Control the light source: Red worms like light, so the lights should not be turned off at night, otherwise they will easily die. 3. Water quality control: The water level can be slightly shallower during the day to increase the water temperature, and the water level can be deepened at night. 4. Feeding bait: Ferment rice bran, silt, pigeon droppings, sawdust, etc. into feed. 2. How to breed red worms?Step/Method 1 1. The first step is to wash the worms. Wash the red worms in clean water for several times. After washing, let them stand for about ten minutes to wash away the gelatinous substances on the worms (mainly the carbon dioxide breathed by the red worms). This will allow the worms to be stored for a longer time. Whether you buy online or in a physical store, this step is essential. Step/Method 2 2. Choose a container of appropriate size according to the amount of bloodworms (generally speaking, the container mouth should be larger than the evenly spread area of the worms). Choose a wide-mouth bottle for easy later operation. The container can be made of plastic or glass. Do not choose an iron container. Long-term contact between iron containers and water will cause chemical reactions, thereby accelerating the death of bloodworms. Step/Method 3 3. Prepare an appropriate amount of sand. It is best to sift it with a dense-hole scoop bag. The amount of sand should account for about two-thirds of the volume of the container. Then wash the sand repeatedly several times to remove the dirt on it. Step/Method 4 4. Put the processed sand into the container. Do not press the sand in the container with your hands. Just pour it in naturally. This way the sand will be looser and easier for the red worms to breathe. After completing this step, spread the red worms evenly on the wet sand (the surface of the sand), and then proceed to the last step. Find a piece of thin cotton cloth, wet it with clean water, cover the red worms, and finally place the container in a cool place indoors. The entire insect breeding process is completed. Step/Method 5 5. Later care methods: If it is winter, you can pour a little water on the cotton cloth every four or five days to ensure the moisture of the insect breeding environment; in spring, when the temperature has not reached above 20 degrees, water it every two or three days. When the temperature exceeds 20 degrees, the container needs to be placed in the refrigerator's fresh-keeping room, and the watering interval is about three or four days. Step/Method 6 6. You can feed it with yeast soaked in water 3. How to breed red worms?Step/Method 1 When breeding red worms, prepare a glass container, put the selected red worms into it, and then inject clean and sterile natural water. If you want to use tap water for breeding, it is best to expose the tap water to the sun for 2-3 days to remove the chlorine in it to prevent poor growth of the red worms. Step/Method 2 Control light source The growth of red worms cannot be separated from light. Lack of light source will cause the red worms to have difficulty breathing and suffocate to death. When breeding, it is best to hang a 5-watt light bulb above the container to provide the red worms with sufficient light, allowing them to breathe freely and grow healthily. Step/Method 3 Water quality control When breeding red worms, the water should be changed once a day to keep the water clean. In the process of changing the water, the red worms and the container should be cleaned to remove the mucus to avoid the breeding of bacteria. The breeding water depth should be controlled at about 3-5 cm, and the water level should be deepened at night to keep warm. Step/Method 4 Feeding. Red worms mainly feed on organic debris in the soil, and they particularly like sweet and acidic baits. Poultry manure, domestic sewage, etc. are all their baits. In professional farms, rice bran, sawdust, sludge, pigeon manure and other raw materials are generally fermented to make feed. If it is a family farm, yeast powder can be soaked in water and fed. Feeding is also a key point in red worm production. Feeding in small amounts and multiple times can increase production. Generally, feeding is done once every 3-4 days, and 50 to 100 kilograms of manure is fed per mu each time. It is mixed with water and sprinkled throughout the pond. When feeding, pay attention to the amount of residual bait, and do not blindly feed more, so as to avoid excessive organic matter in the water body causing fermentation to produce toxic substances, affecting production. 4. How to raise red worms?Red worms, also known as water earthworms, are actually the larvae of chironomids. They live in river and pond sludge, but require flowing and clean water. Red worms are the best bait for fish, containing high protein. They are also one of the popular foods on foreign tables in recent years, comparable to snails. There are specialized breeding farms. Rice bran, sawdust, banana peels, sugarcane bagasse, silt, pigeon manure, etc. are often fermented to make breeding feed. When breeding a small amount of red worms at home, the river and pond sludge can be taken back together with the worm species and placed in a clay pot or glass container. It is best to soak them with river water. If tap water is used for breeding, tap water should be placed in a large basin for 2-3 days in advance to remove bleaching powder and other substances before use. Change the water every other day. (You can also store the container in the refrigerator). When using, take as much as you need, put it on a clean, moist red cloth. In winter, it should be protected from freezing and placed in a box for heat preservation. If you spray it with wine, the shelf life can be extended, but it cannot be bred again and must not be put back into the original breeding basin. 5. What is the easiest way to raise red worms?There are many ways to raise red worms. Here I share a simple and practical method of raising red worms using a flower pot. 1. Put a round sponge at the bottom of the flower pot (wet the sponge in water first), put some soil for raising earthworms on the sponge, sprinkle some water on the soil and mix well, not too much water. Spread the purchased red worms on the soil. Get a sponge about 2 cm thick that is as big as the mouth of the flower pot, soak it in water and squeeze it with both hands to make sure there is not too much water in the sponge, and cover the red worms. 2. Place the flower pot in a plastic basin and add three centimeters of water to the plastic basin. 3. Place the plastic basin in a cool and ventilated place, and avoid exposure to the sun; add some water to the plastic basin regularly to keep the water three centimeters deep. In this way, the water in the plastic basin can continuously seep into the bottom of the flower pot, then seep into the sponge at the bottom of the pot, and then seep into the nearby soil through the sponge, so that the soil is always moist, and the red worms can not only survive, but also absorb nutrients in the soil to grow. Regularly soak the sponge covering the red worms in water, squeeze out excess water, and then cover it. When it freezes in winter, place the plastic basin in a non-freezing place indoors to prevent the red worms from freezing to death, and do not cover the flower pot tightly without ventilation to suffocate the red worms. 6. How to raise red worms?In the process of artificial breeding, the water depth is generally maintained at about three to five centimeters. Especially in spring, when artificial breeding is carried out, the water level can be slightly lowered. This method can effectively increase the water temperature. Deepening the water level at night can effectively keep warm. Fertile water with a steady flow can allow red worms to reproduce in large numbers. At this time, you can place the silt and red worms together in a clean glass container and use some natural pure water for breeding. If you want to use tap water for breeding, you must place them under sunlight for two or three days before using them as reasonable breeding water. Change the water in time every day and take some very good warming measures. Red worms mainly eat organic fertilizers and like some sour and sweet feeds. Generally, they need to be fed once every three days. One mu of land should be fertilized with more than 50 kg of fertilizer each time, and a certain amount of water should be added, and then sprinkled after sufficient stirring. 7. How to breed red worms?Step/Method 1 Pool and density: When breeding red worms artificially, the number is generally large, and it is very common to breed them on a large scale. The first thing to pay attention to is the breeding pool and density. You can use a cement pool to breed red worms. The depth of the water can be controlled at 20-30 cm. It does not need to be too deep. Some silt can be placed at the bottom of the pool. The number of red worms should not be too large, otherwise the dissolved oxygen in the water will be insufficient, and there will be insufficient food. Step/Method 2 Food: There are many kinds of food that red worms can eat. Some red worms only eat meat, while others are omnivorous and can eat both meat and vegetables. Even some bacteria can become their food. If you are breeding red worms artificially, you can also add some glucose to the water, which will help the red worms grow better. Step/Method 3 Water temperature: When breeding red worms, you need to pay special attention to the water temperature, because the water temperature has a relatively large impact on the growth and development of red worms. Red worms are more afraid of heat, but not too afraid of cold, so it can be kept at around 10 degrees, or even more than 10 degrees. When the temperature is suitable, the growth and reproduction speed of red worms are relatively fast. Step/Method 4 Water change: When breeding red worms, you must pay attention to water changes, otherwise the water quality will be poor and the dissolved oxygen content will be insufficient. The specific frequency of water changes can be determined according to the state of the water in the pool, and the water quality in the pool can be monitored in real time. Step/Method 5 Light: Red worms don't like strong light, so try to keep the pool darker. If there is strong light during the day, it is recommended to cover it in time. 8. How to raise red worms?To raise red worms, you must first collect them and then prepare the breeding containers. During the breeding process, you must do a good job of water quality management, light source control, feed feeding, etc. When the number of red worms increases, you must harvest them in time and dry them. 1. Red worm collection Red worms like to live in fertile water with slow flow. Late spring and early autumn every year is the season when red worms reproduce in large numbers. They float on the water surface, often making the water surface brown-red. This is a great opportunity for us to collect red worms. 2. Cultivation vessels When raising a small amount of bloodworms at home, you can take the river pond sludge together with the bloodworms and put them in a basin or glass container. It is best to soak them in river water. If you use tap water for breeding, you should dry the tap water for 2 to 3 days in advance to remove bleach and other substances. Change the water every other day. In winter, you need to prevent freezing and put a wet red cloth on the container to keep it moist. It is best to use a container with a large area of contact with air, because the bloodworms will float to the surface of the water and have a breathing-like movement, so if there are a lot of them, some of them may not be able to compete for a position and die. 3. Light source control A light source is necessary for raising red worms, and the light source cannot be turned off at night. You can use a small light source (such as a 5-watt night light, etc.) at night, because red worms are too lazy to breathe, and if there is no light source, they will easily die the next day. 4. Feeding Most large-scale professional red worm farms use rice bran, sawdust, banana peels, bagasse, sludge, pigeon manure, etc. to ferment and make them into breeding feed. Home-based red worm breeding can use yeast powder soaked in water to feed, but the amount must be controlled. 5. Harvest and Overwintering When the number of red worms increases, they should be collected and dried in time. In late autumn and winter, the reproduction capacity of red worms is greatly weakened. When you can't see the red worms in the water tank, don't pour out the water in the tank, because they are hiding in the green algae. You can put the water tank in a sunny room or near the radiator. In spring, when the indoor temperature rises, the red worms come out again. When the room temperature rises above 28℃, the red worms begin to reproduce in large numbers. |
<<: CATDOLL: How long can fireflies live? Why? (How long can fireflies live?)
>>: CATDOLL: What are the good things to prepare for raising snails?
1. Where can I buy dried cockroaches? To purchase...
Definition and advantages of twin pig farming Twi...
1. What are the top ten techniques for beginners ...
1. What is the current price of common fish in yo...
1. How many types of oxygen-deficient fish are th...
1. How to raise river clams and produce pearls in...
Question 1: What water should be used to raise tr...
1. Can silver carp be raised? How to raise it? Fi...
How do hyacinths reproduce? Propagation by latera...
Chongqing is a food capital, and hairy crabs also...
If a family has these three problems, then the fa...
1. What are the methods of earthworm farming? How...
How to transport earthworms? Water earthworms, al...
1. What are the prospects and profits of mulberry...
1. Why can’t cockroaches be widely bred? Because ...