CATDOLL : CATDOLL: How polluting is the method of raising red worms? (How polluting is the method of raising red worms?)

1. How to raise red worms?

1. Breeding conditions: To breed red worms, prepare a glass container, then put red worms and unpolluted natural water into it.

2. Control the light source: Hang a 5-watt bulb above the container to provide 24 hours of light for the red worms every day.

3. Water quality control: Change the water once a day and clean the bloodworms and mucus on the utensils.

2. Will feeding red worms pollute the water?

Feeding bloodworms pollutes water bodies because bloodworms are bottom dwellers that contain bacteria and cause microbial growth.

3. What are the breeding techniques for red worms?

1. Breeding pond: Bloodworm breeding is generally carried out on a large scale, so a breeding pond is needed. The number of bloodworms to be put in can be determined by the size of the breeding pond, and the water depth. When breeding bloodworms, the water should not be too deep. Generally speaking, 20 to 30 centimeters is more appropriate. In addition, some silt needs to be placed at the bottom of the pond, where bloodworms like to move around.

2. Food: The main food of red worms is plankton and organic debris in the water. When the water is rich in nutrients, the growth rate of red worms will be fast. Therefore, it is best to add some fermented fertilizer to the water regularly, so that the nutrients in the water will be richer. 3. Water quality: It is more appropriate to use river water or pond water to breed red worms, because such water is closer to the native environment of red worms, but tap water is more convenient. But don't use tap water directly. It is best to expose them to the sun for two or three days and wait until the chlorine in them is basically removed before using them. Red worms do not have high requirements for water quality, but water quality is closely related to dissolved oxygen, so water changes must also be done well.

4. How to raise red worms at home?

It is advisable to choose a cool and humid environment, and the density of red worms should not be too high.

Water source: Red worms are afraid of pungent odors. If they are raised with tap water, they must be exposed to the sun for a few days to remove the chlorine.

Cleaning: Clean the breeding pots and dead red worms in time to keep the red worm breeding pots clean.

Feeding: Glucose can be used directly for feeding, 2-3 times a week, a few milliliters at a time.

5. How to breed red worms?

Step/Method 1

When breeding red worms, prepare a glass container, put the selected red worms into it, and then inject clean and sterile natural water. If you want to use tap water for breeding, it is best to expose the tap water to the sun for 2-3 days to remove the chlorine in it to prevent poor growth of the red worms.

Step/Method 2

Control light source

The growth of red worms cannot be separated from light. Lack of light source will cause the red worms to have difficulty breathing and suffocate to death. When breeding, it is best to hang a 5-watt light bulb above the container to provide the red worms with sufficient light, allowing them to breathe freely and grow healthily.

Step/Method 3

Water quality control

When breeding red worms, the water should be changed once a day to keep the water clean. In the process of changing the water, the red worms and the container should be cleaned to remove the mucus to avoid the breeding of bacteria. The breeding water depth should be controlled at about 3-5 cm, and the water level should be deepened at night to keep warm.

Step/Method 4

Feeding. Red worms mainly feed on organic debris in the soil, and they particularly like sweet and acidic baits. Poultry manure, domestic sewage, etc. are all their baits. In professional farms, rice bran, sawdust, sludge, pigeon manure and other raw materials are generally fermented to make feed. If it is a family farm, yeast powder can be soaked in water and fed. Feeding is also a key point in red worm production. Feeding in small amounts and multiple times can increase production. Generally, feeding is done once every 3-4 days, and 50 to 100 kilograms of manure is fed per mu each time. It is mixed with water and sprinkled throughout the pond. When feeding, pay attention to the amount of residual bait, and do not blindly feed more, so as to avoid excessive organic matter in the water body causing fermentation to produce toxic substances, affecting production.

6. How to raise red worms?

Container selection

It is best to use a container with a larger area in contact with the air, because the red worms will float to the water surface and make breathing-like movements, so if there are too many of them, some of them may not be able to compete for a position and die.

Water changes

When breeding a small number of bloodworms at home, you can take the river pond sludge together with the bloodworms and put them in a basin or glass container. It is best to soak them with river water. If you use tap water for breeding, you should dry the tap water for 2 to 3 days in advance to remove impurities. Change the water every other day.

rinse

First, you need to wash the basin. Every time you change the water, after pouring the insects into the sieve, you need to clean the basin with clean water. At this time, there will be some sticky mucus on the basin, which makes it sticky. Wash all of this off and rinse the basin clean. Second, you need to wash the insects. Take some water from the basin and rinse the insects in the sieve with water to wash off the mucus and dirt on the insects.

7. How to breed red worms?

Step/Method 1

Pool and density: When breeding red worms artificially, the number is generally large, and it is very common to breed them on a large scale. The first thing to pay attention to is the breeding pool and density. You can use a cement pool to breed red worms. The depth of the water can be controlled at 20-30 cm. It does not need to be too deep. Some silt can be placed at the bottom of the pool. The number of red worms should not be too large, otherwise the dissolved oxygen in the water will be insufficient, and there will be insufficient food.

Step/Method 2

Food: There are many kinds of food that red worms can eat. Some red worms only eat meat, while others are omnivorous and can eat both meat and vegetables. Even some bacteria can become their food. If you are breeding red worms artificially, you can also add some glucose to the water, which will help the red worms grow better.

Step/Method 3

Water temperature: When breeding red worms, you need to pay special attention to the water temperature, because the water temperature has a relatively large impact on the growth and development of red worms. Red worms are more afraid of heat, but not too afraid of cold, so it can be kept at around 10 degrees, or even more than 10 degrees. When the temperature is suitable, the growth and reproduction speed of red worms are relatively fast.

Step/Method 4

Water change: When breeding red worms, you must pay attention to water changes, otherwise the water quality will be poor and the dissolved oxygen content will be insufficient. The specific frequency of water changes can be determined according to the state of the water in the pool, and the water quality in the pool can be monitored in real time.

Step/Method 5

Light: Red worms don't like strong light, so try to keep the pool darker. If there is strong light during the day, it is recommended to cover it in time.

8. How to raise and breed red worms at home?

First, red worms cannot simply be soaked in water for a long time. You should add river mud or pond mud, preferably with more sand. The water should also be natural water, not tap water, because tap water contains bleach, which will kill the red worms. It is best to change the water once a day, because the water in the natural environment is flowing water, or slightly flowing water.

Second, the breeding container. It is best to use a wide-mouthed glass container for breeding, as this container has a large contact area between water and air, high dissolved oxygen, and good light.

Third, the light source is very important. When breeding red worms at night, there must be sufficient light source, a small-power bulb will do. Anyway, the light source must be sufficient. When the temperature is high, the red worms will float to the surface of the water to breathe fresh air and bask in the sun.

4. Food. The food of bloodworms is similar to that of earthworms. Bran, fruit peels, sugarcane bagasse, fermented poultry manure, and even silt can be used as food for bloodworms.

5. Temperature. Never freeze red worms, as they will die if frozen. It is best to keep the temperature above 20 degrees. When the temperature is above 25 degrees, red worms can reproduce.

9. How to raise red worms at home?

When raising a small amount of bloodworms at home, you can take the river pond sludge together with the bloodworms and put them in a basin or glass container. It is best to soak them in river water. If you use tap water for breeding, you should dry the tap water for 2 to 3 days in advance to remove bleach and other substances. Change the water every other day. In winter, you need to prevent freezing and put a wet red cloth on the container to keep it moist. It is best to use a container with a large area of ​​contact with air, because the bloodworms will float to the surface of the water and have a breathing-like movement, so if there are a lot of them, some of them may not be able to compete for a position and die.