CATDOLL : CATDOLL: Technical requirements for breeding red worms (What are the technical requirements for breeding red worms)

1. How to breed red worms?

1. Breeding conditions: To breed red worms, prepare a glass container, then put red worms and unpolluted natural water into it.

2. Control the light source: Hang a 5-watt bulb above the container to provide 24 hours of light for the red worms every day.

3. Water quality control: Change the water once a day and clean the bloodworms and mucus on the utensils.

2. How to raise red worms?

In the process of artificial breeding, the water depth is generally maintained at about three to five centimeters. Especially in spring, when artificial breeding is carried out, the water level can be slightly lowered. This method can effectively increase the water temperature. Deepening the water level at night can effectively keep warm.

Fertile water with a steady flow can allow red worms to reproduce in large numbers. At this time, you can place the silt and red worms together in a clean glass container and use some natural pure water for breeding. If you want to use tap water for breeding, you must place them under sunlight for two or three days before using them as reasonable breeding water. Change the water in time every day and take some very good warming measures.

Red worms mainly eat organic fertilizers and like some sour and sweet feeds. Generally, they need to be fed once every three days. One mu of land should be fertilized with more than 50 kg of fertilizer each time, and a certain amount of water should be added, and then sprinkled after sufficient stirring.

3. How to breed red worms?

Step/Method 1

When breeding red worms, prepare a glass container, put the selected red worms into it, and then inject clean and sterile natural water. If you want to use tap water for breeding, it is best to expose the tap water to the sun for 2-3 days to remove the chlorine in it to prevent poor growth of the red worms.

Step/Method 2

Control light source

The growth of red worms cannot be separated from light. Lack of light source will cause the red worms to have difficulty breathing and suffocate to death. When breeding, it is best to hang a 5-watt light bulb above the container to provide the red worms with sufficient light, allowing them to breathe freely and grow healthily.

Step/Method 3

Water quality control

When breeding red worms, the water should be changed once a day to keep the water clean. In the process of changing the water, the red worms and the container should be cleaned to remove the mucus to avoid the breeding of bacteria. The breeding water depth should be controlled at about 3-5 cm, and the water level should be deepened at night to keep warm.

Step/Method 4

Feeding. Red worms mainly feed on organic debris in the soil, and they particularly like sweet and acidic baits. Poultry manure, domestic sewage, etc. are all their baits. In professional farms, rice bran, sawdust, sludge, pigeon manure and other raw materials are generally fermented to make feed. If it is a family farm, yeast powder can be soaked in water and fed. Feeding is also a key point in red worm production. Feeding in small amounts and multiple times can increase production. Generally, feeding is done once every 3-4 days, and 50 to 100 kilograms of manure is fed per mu each time. It is mixed with water and sprinkled throughout the pond. When feeding, pay attention to the amount of residual bait, and do not blindly feed more, so as to avoid excessive organic matter in the water body causing fermentation to produce toxic substances, affecting production.

4. Red worm breeding technology?

Step/Method 1

When breeding red worms, prepare a glass container, put the selected red worms into it, and then inject clean and sterile natural water. If you want to use tap water for breeding, it is best to expose the tap water to the sun for 2-3 days to remove the chlorine in it to prevent poor growth of the red worms.

Control light source

The growth of red worms cannot be separated from light. Lack of light source will cause the red worms to have difficulty breathing and suffocate to death. When breeding, it is best to hang a 5-watt light bulb above the container to provide the red worms with sufficient light, allowing them to breathe freely and grow healthily.

Step/Method 3

Water quality control

When breeding red worms, the water should be changed once a day to keep the water clean. In the process of changing the water, the red worms and the container should be cleaned to remove the mucus to avoid the breeding of bacteria. The breeding water depth should be controlled at about 3-5 cm, and the water level should be deepened at night to keep warm.

Step/Method 4

Feeding. Red worms mainly feed on organic debris in the soil, and they particularly like sweet and acidic baits. Poultry manure, domestic sewage, etc. are all their baits. In professional farms, rice bran, sawdust, sludge, pigeon manure and other raw materials are generally fermented to make feed. If it is a family farm, yeast powder can be soaked in water and fed. Feeding is also a key point in red worm production. Feeding in small amounts and multiple times can increase production. Generally, feeding is done once every 3-4 days, and 50 to 100 kilograms of manure is fed per mu each time. It is mixed with water and sprinkled throughout the pond. When feeding, pay attention to the amount of residual bait, and do not blindly feed more, so as to avoid excessive organic matter in the water body causing fermentation to produce toxic substances, affecting production.

5. What is the correct way to feed red worms?

Environment: It is advisable to choose a cool and humid environment, and the density of red worms should not be too high.

Water source: Red worms are afraid of pungent odors. If they are raised with tap water, they must be exposed to the sun for a few days to remove the chlorine.

Cleaning: Clean the breeding pots and dead red worms in time to keep the red worm breeding pots clean.

Feeding: Glucose can be used directly for feeding, two or three times a week

6. Indoor artificial breeding technology of red worms?

Red worms cannot simply be soaked in water for a long time. River mud or pond mud should be added, preferably with more sand content. The water should also be natural water, not tap water, because tap water contains bleach, which will kill the red worms. It is best to change the water once a day, because the water in the natural environment is flowing water, or slightly flowing water.

7. How to breed red worms?

1. Related information about red worms

1. Distribution of red worms

Red worms generally refer to blood worms, also known as chironomid larvae. They have a worm-like body and a dark red body color. They have a wide distribution range and can be seen in basically all kinds of water bodies, and their distribution numbers are very large.

2. The value of red worms

Red worms are rich in nutrients, including protein, fat, calories, etc., and can be used as natural bait for economic aquatic animals. Moreover, red worms are of appropriate size, have good palatability, and are nutritionally comprehensive, which can promote the growth and development of fish. Red worms will also ingest organic debris in the breeding pond, which not only does not pollute the water body, but also has a certain leech purification effect. Red worms can also accelerate the circulation of water substances and can eliminate organic pollution to a certain extent. In addition, red worms are also used as excellent indicator organisms for monitoring water environment and pollution conditions.

3. Red worm price

Generally, the price of red worms of different specifications, grades and seasons is different, and the price of male red worms is higher than that of female worms. Usually the retail price of male worms ranges from 30-100 yuan/jin, while the female worms are relatively cheaper, ranging from more than ten yuan to 20-30 yuan/jin.

2. What are the profits and prospects of red worms?

1. The prospects of breeding red worms

Blood worms have a wide range of uses, whether they are used as bait for aquatic animals, for purifying water, or for testing water conditions. Moreover, as more aquatic organisms have been farmed in recent years, the demand for red worms has also increased, so the prospects for breeding are still promising.

2. Profits from breeding red worms

Generally, each acre can produce 150 kilograms of red worms per batch, and a batch can be harvested every 10 days or so. The profit per acre in a year can reach more than 50,000 yuan.

3. How to raise red worms?

The difficulty of breeding red worms is not great, but if you want to obtain high quality and high efficiency, you must master the following points:

1. The red worm breeding pond should choose a paddy field with sufficient water source and convenient irrigation and drainage as the breeding base, or choose a place with sufficient water source to convert dry land into paddy field; then prepare a silt cement pool rich in organic matter with a depth of about 50 cm and a water depth of 20-30 cm as the red worm breeding pond.

2. The introduction and inoculation of red worms are very simple, and the best time is spring and summer. Just sprinkle the collected red worms evenly in the cultivation pool. Remember to sprinkle fermented organic fertilizer into the pool water regularly in spring every year to keep the pool water fertile.

3. During the growth period, organic fertilizer should be sprinkled regularly or land grass should be directly added to allow the land grass to rot and ferment in the water. In summer, when the light and temperature are strong, the water in the pool should be appropriately increased, or a sunshade, grape rack, etc. should be built above the breeding pool.

4. Since bloodworms mainly feed on organic debris in the mud, and especially like sweet and sour bait, agricultural and sideline product waste, well-rotted organic fertilizer, etc. are good baits for them; generally, they are fed once every three days during the peak production period, and the amount of feeding is determined by the number of bloodworms in the breeding pond. In addition, water discharge should be stopped half an hour before and after feeding to avoid the loss of manure and other wastes. In addition, it should be noted that the feeding of each bait should be determined by the expected yield and the amount of remaining bait in the field.

8. How to raise red worms?

Step/Method 1

When breeding red worms, prepare a glass container, put the selected red worms into it, and then inject clean and sterile natural water. If you want to use tap water for breeding, it is best to expose the tap water to the sun for 2-3 days to remove the chlorine in it to prevent poor growth of the red worms.

Step/Method 2

Control light source

The growth of red worms cannot be separated from light. Lack of light source will cause the red worms to have difficulty breathing and suffocate to death. When breeding, it is best to hang a 5-watt light bulb above the container to provide the red worms with sufficient light, allowing them to breathe freely and grow healthily.

Step/Method 3

Water quality control

When breeding red worms, the water should be changed once a day to keep the water clean. In the process of changing the water, the red worms and the container should be cleaned to remove the mucus to avoid the breeding of bacteria. The breeding water depth should be controlled at about 3-5 cm, and the water level should be deepened at night to keep warm.

Step/Method 4

Feeding. Red worms mainly feed on organic debris in the soil, and they particularly like sweet and acidic baits. Poultry manure, domestic sewage, etc. are all their baits. In professional farms, rice bran, sawdust, sludge, pigeon manure and other raw materials are generally fermented to make feed. If it is a family farm, yeast powder can be soaked in water and fed. Feeding is also a key point in red worm production. Feeding in small amounts and multiple times can increase production. Generally, feeding is done once every 3-4 days, and 50 to 100 kilograms of manure is fed per mu each time. It is mixed with water and sprinkled throughout the pond. When feeding, pay attention to the amount of residual bait, and do not blindly feed more, so as to avoid excessive organic matter in the water body causing fermentation to produce toxic substances, affecting production.