1. What is the best method for breeding red worms at home?1. Breeding conditions: To breed red worms, prepare a glass container, then put red worms and unpolluted natural water into it. 2. Control the light source: Hang a 5-watt bulb above the container to provide 24 hours of light for the red worms every day. 3. Water quality control: Change the water once a day and clean the bloodworms and mucus on the utensils. 2. How to raise red worms at home?1. Place the bottom mud and red worms in a glass container and add water. 2. Before using tap water, place it in the sun for two to three days. 3. Change the water once a day and cover the container with a red wet towel to keep it moist. 4. The lights cannot be turned off at night. Without light source, the red worms will suffocate and die. 5. Red worms mainly feed on organic debris in the soil, and particularly like sweet and acidic baits, such as poultry manure, domestic sewage, etc. 3. What is the easiest way to raise red worms?There are many ways to raise red worms. Here I share a simple and practical method of raising red worms using a flower pot. 1. Put a round sponge at the bottom of the flower pot (wet the sponge in water first), put some soil for raising earthworms on the sponge, sprinkle some water on the soil and mix well, not too much water. Spread the purchased red worms on the soil. Get a sponge about 2 cm thick that is as big as the mouth of the flower pot, soak it in water and squeeze it with both hands to make sure there is not too much water in the sponge, and cover the red worms. 2. Place the flower pot in a plastic basin and add three centimeters of water to the plastic basin. 3. Place the plastic basin in a cool and ventilated place, and avoid exposure to the sun; add some water to the plastic basin regularly to keep the water three centimeters deep. In this way, the water in the plastic basin can continuously seep into the bottom of the flower pot, then seep into the sponge at the bottom of the pot, and then seep into the nearby soil through the sponge, so that the soil is always moist, and the red worms can not only survive, but also absorb nutrients in the soil to grow. Regularly soak the sponge covering the red worms in water, squeeze out excess water, and then cover it. When it freezes in winter, place the plastic basin in a non-freezing place indoors to prevent the red worms from freezing to death, and do not cover the flower pot tightly without ventilation to suffocate the red worms. 4. How to raise red worms at home?When raising a small amount of bloodworms at home, you can take the river pond sludge together with the bloodworms and put them in a basin or glass container. It is best to soak them in river water. If you use tap water for breeding, you should dry the tap water for 2 to 3 days in advance to remove bleach and other substances. Change the water every other day. In winter, you need to prevent freezing and put a wet red cloth on the container to keep it moist. It is best to use a container with a large area of contact with air, because the bloodworms will float to the surface of the water and have a breathing-like movement, so if there are a lot of them, some of them may not be able to compete for a position and die. 5. How to raise and breed red worms at home?First, red worms cannot simply be soaked in water for a long time. You should add river mud or pond mud, preferably with more sand. The water should also be natural water, not tap water, because tap water contains bleach, which will kill the red worms. It is best to change the water once a day, because the water in the natural environment is flowing water, or slightly flowing water. Second, the breeding container. It is best to use a wide-mouthed glass container for breeding, as this container has a large contact area between water and air, high dissolved oxygen, and good light. Third, the light source is very important. When breeding red worms at night, there must be sufficient light source, a small-power bulb will do. Anyway, the light source must be sufficient. When the temperature is high, the red worms will float to the surface of the water to breathe fresh air and bask in the sun. 4. Food. The food of bloodworms is similar to that of earthworms. Bran, fruit peels, sugarcane bagasse, fermented poultry manure, and even silt can be used as food for bloodworms. 5. Temperature. Never freeze red worms, as they will die if frozen. It is best to keep the temperature above 20 degrees. When the temperature is above 25 degrees, red worms can reproduce. 6. How to raise red worms?Container selection It is best to use a container with a larger area in contact with the air, because the red worms will float to the water surface and make breathing-like movements, so if there are too many of them, some of them may not be able to compete for a position and die. Water changes When breeding a small number of bloodworms at home, you can take the river pond sludge together with the bloodworms and put them in a basin or glass container. It is best to soak them with river water. If you use tap water for breeding, you should dry the tap water for 2 to 3 days in advance to remove impurities. Change the water every other day. rinse First, you need to wash the basin. Every time you change the water, after pouring the insects into the sieve, you need to clean the basin with clean water. At this time, there will be some sticky mucus on the basin, which makes it sticky. Wash all of this off and rinse the basin clean. Second, you need to wash the insects. Take some water from the basin and rinse the insects in the sieve with water to wash off the mucus and dirt on the insects. 7. How to raise red worms at home?When raising a small amount of bloodworms at home, you can take the river pond sludge together with the bloodworms and put them in a basin or glass container. It is best to soak them in river water. If you use tap water for breeding, you should dry the tap water for 2 to 3 days in advance to remove bleach and other substances. Change the water every other day. In winter, you need to prevent freezing and put a wet red cloth on the container to keep it moist. It is best to use a container with a large area of contact with air, because the bloodworms will float to the surface of the water and have a breathing-like movement, so if there are a lot of them, some of them may not be able to compete for a position and die. 8. How to raise red worms at home?Breeding conditions: To breed bloodworms, prepare a glass container, then put the bloodworms and unpolluted natural water into it. 2. Control the light source: Hang a 5-watt bulb above the container to provide 24 hours of light for the red worms every day. 3. Water quality control: Change the water once a day and clean the bloodworms and mucus on the utensils. 9. What is the easiest way to raise red worms?Step/Method 1 When breeding red worms, prepare a glass container, put the selected red worms into it, and then inject clean and sterile natural water. If you want to use tap water for breeding, it is best to expose the tap water to the sun for 2-3 days to remove the chlorine in it to prevent poor growth of the red worms. Step/Method 2 Control light source The growth of red worms cannot be separated from light. Lack of light source will cause the red worms to have difficulty breathing and suffocate to death. When breeding, it is best to hang a 5-watt light bulb above the container to provide the red worms with sufficient light, allowing them to breathe freely and grow healthily. Step/Method 3 During the process of breeding red worms, the water quality should be changed once a day to keep the water clean. In the process of changing the water, the red worms and the container should be cleaned to remove the mucus to avoid the breeding of bacteria. The breeding water depth should be controlled at about 3-5 cm, and the water level should be deepened at night to keep warm. Step/Method 4 Feeding. Red worms mainly feed on organic debris in the soil, and they particularly like sweet and acidic baits. Poultry manure, domestic sewage, etc. are all their baits. In professional farms, rice bran, sawdust, sludge, pigeon manure and other raw materials are generally fermented to make feed. If it is a family farm, yeast powder can be soaked in water and fed. Feeding is also a key point in red worm production. Feeding in small amounts and multiple times can increase production. Generally, feeding is done once every 3-4 days, and 50 to 100 kilograms of manure is fed per mu each time. It is mixed with water and sprinkled throughout the pond. When feeding, pay attention to the amount of residual bait, and do not blindly feed more, so as to avoid excessive organic matter in the water body causing fermentation to produce toxic substances, affecting production. |
>>: CATDOLL: What is the architectural structure of a honey nest?
What foods do Chinese medicinal plants like to ea...
The black and white yin-yang face cat, also known...
Fixation The bristles on the ventral surface of t...
1. Are spiders cold-blooded or warm-blooded anima...
There are many types of fish feed. Generally spea...
Shrimp (scientific name: Chinese white shrimp, co...
1. New technologies and methods for silkworm bree...
1. Biological habits of Zhoushan large yellow cro...
1. Uncle Zhang earned a total of 38,000 yuan from...
1. How to raise spiders, what do they eat, and do...
1. What do spiders mainly eat? Small spiders can ...
1. What is the profit from artificial breeding of...
1. What is the correct way to feed silkworms? 1. ...
The original intention of putting up anti-escape ...
Causes and symptoms of piglet skin ulcers Piglets...