CATDOLL : CATDOLL: What is the standard size of a Chinese beehive?

1. What is the standard size of a Chinese beehive?

The outer dimensions of the nest box are 41cm×51cm×26cm;

The inner dimensions of the nest box are 37cm×47cm×26cm;

The box lid measures 45cm×55cm×8cm.

2. Nest box:

A shallow groove with a width of 12mm and a depth of 3mm is left in the center of the inner surface of the front and rear walls for the insertion of the isolation plate; there are two notches with a length of 120mm and a width of 20mm at the lower edge of the front wall; a nest door panel with a length of 386mm, a height of 50mm and a thickness of 15mm is inserted in the front.

There are 10 round hole nest doors on one side of the board and two tongue-shaped nest doors with a length of 60 mm and a height of 10 mm on the other side. There are two 80 mmX110 mm iron screens on the upper part of the back wall, and each has a 100 mm wide wooden board that can be moved left and right for opening and closing.

3. Box cover:

1. Inner circumference length 490mm, width 420mm, height 85mm, plate thickness 15mm;

2. Nail a 40mm long, 20mm wide and thick wooden board to the four corners of the box cover. Or nail a 420mm long, 20mm wide and thick wooden strip to the front and back. Make the box cover float on the auxiliary cover.

3. Galvanized iron sheet or linoleum is nailed on the cover. There are two tongue-shaped vents on both sides, 100mm long and 20mm high.

2. How to place the beehive in the beehive?

Just put the queen bee in another beehive, or when hunting bees in tree holes or earth holes, first use a smoker or moxa stick to spray smoke from the hole to the inside to subdue the bees; then chisel or dig the cave to expose the honeycomb; then refer to the method of Chinese bees passing through the box, cut the honeycomb and collect it. When collecting bee groups, pay special attention to the queen bee. If wild bees live in a cave that is difficult to chisel, when collecting, you should first observe how many entrances and exits there are, then keep the main one, and seal all the other entrances with soil, then use absorbent cotton dipped in repellents such as carbolic acid, camphor oil, and sanitary ball powder, stuff it under the beehive, and then put a conical iron gauze cover from this hole, and the other end of the cover is connected to the beehive. The bees in the hole enter the beehive along the iron gauze cover due to the repellent. When you see that the queen bee has entered the beehive through the gauze cover and the bees in the hole are basically driven out, you can move the captured bees back for processing. Or you can fill the cabinet with water and block all the exits with a beehive, and the bees will fly in obediently.

3. What is the most suitable size of the native beehive for Chinese honey bees? What is the suitable temperature in the beehive?

1. Nest box: 440 mm long, 370 mm wide, 270 mm high. 2. Nest frame: 420 mm long, 250 mm high, upper beam 25 mm wide, 20 mm thick, 456 mm long. 3. Shallow super box: about 135 mm high, 370 mm wide, 440 mm long. 4. The size of the sub-cover of the beehive is the same as the outer size of the box. 5. The inner circumference of the box cover: 490 mm, 420 mm wide, 85 mm high.

1. What is the most suitable size for native beehives?

1. Generally speaking, the inner circumference of the nest box is 440 mm in length, 370 mm in width, 270 mm in height, and about 20 mm in thickness. A shallow groove 12 mm wide and 3 mm deep is left in the central part of the inner surface of the front and rear walls, and two notches 120 mm long and 20 mm wide are left on the lower edge of the front wall. The upper edge of the entire outer box is widened by a protective strip of about 20 mm and 25 mm high.

2. Generally speaking, the outer periphery of the nest frame is 420 mm long, 250 mm high, the upper beam is 25 mm wide, 20 mm thick, and 456 mm long. In addition, the frame ear is 28 mm long, the side strip is 240 mm long, 25 mm wide, and 10 mm thick, and the lower beam is 400 mm long, 15 mm wide, and 10 mm thick.

3. Generally speaking, the inner circumference of the shallow super is about 135 mm high, 370 mm wide, 440 mm long, and 20 mm thick. In addition, the outer perimeter of the nest frame is 420 mm long, 125 mm high, and the upper beam is 15 mm thick, 456 mm long, and 25 mm wide. It can be flexibly adopted according to the growth of the Chinese bees.

4. Generally speaking, the size of the beehive sub-cover is the same as the outer size of the hive body, and the materials used are wooden cover and iron mesh cover.

5. Generally speaking, the inner circumference of the beehive lid is about 490 mm long, 420 mm wide, 85 mm high and 15 mm thick. A wooden board 40 mm long, 20 mm wide and thick is nailed to the four corners inside. Galvanized iron sheet or tarpaulin is nailed on the top. There are also two tongue-shaped vents about 100 mm long and 20 mm high on each side.

2. What is the appropriate temperature in the beehive?

1. In some places, the temperature is high, the queen bee will stop laying eggs, and there will be no bee larvae in the bee colony. But in some places, even if the temperature is high, the queen bee can still lay eggs, and there will be larvae in the bee colony. Therefore, the suitable temperature of the beehive needs to be determined according to the actual situation of the bee colony.

2. In a bee colony with larvae, the central temperature of the colony remains basically unchanged, approximately between 34.4℃ and 34.8℃. The temperature where there are young bees generally remains between 32-35℃. In the periphery of the hive where there are no bee larvae, the temperature generally remains above 20℃.

3. When there are no larvae in the bee colony, temperature control is generally not strict. At this time, the temperature of the bee colony will generally change with the external temperature and will generally be maintained between 14-32°C.

4. What is the most suitable size of the native beehive for Chinese honey bees? What is the suitable temperature in the beehive?

answer

1. Nest box: 440 mm long, 370 mm wide, 270 mm high. 2. Nest frame: 420 mm long, 250 mm high, upper beam 25 mm wide, 20 mm thick, 456 mm long. 3. Shallow super box: about 135 mm high, 370 mm wide, 440 mm long. 4. The size of the sub-cover of the beehive is the same as the outer size of the box. 5. The inner circumference of the box cover: 490 mm, 420 mm wide, 85 mm high.

1. What is the most suitable size for native beehives?

1. Generally speaking, the inner circumference of the nest box is 440 mm in length, 370 mm in width, 270 mm in height, and about 20 mm in thickness. A shallow groove 12 mm wide and 3 mm deep is left in the central part of the inner surface of the front and rear walls, and two notches 120 mm long and 20 mm wide are left on the lower edge of the front wall. The upper edge of the entire outer box is widened by a protective strip of about 20 mm and 25 mm high.

2. Generally speaking, the outer periphery of the nest frame is 420 mm long, 250 mm high, the upper beam is 25 mm wide, 20 mm thick, and 456 mm long. In addition, the frame ear is 28 mm long, the side strip is 240 mm long, 25 mm wide, and 10 mm thick, and the lower beam is 400 mm long, 15 mm wide, and 10 mm thick.

3. Generally speaking, the inner circumference of the shallow super is about 135 mm high, 370 mm wide, 440 mm long, and 20 mm thick. In addition, the outer perimeter of the nest frame is 420 mm long, 125 mm high, and the upper beam is 15 mm thick, 456 mm long, and 25 mm wide. It can be flexibly adopted according to the growth of the Chinese bees.

4. Generally speaking, the size of the beehive sub-cover is the same as the outer size of the hive body, and the materials used are wooden cover and iron mesh cover.

5. Generally speaking, the inner circumference of the beehive lid is about 490 mm long, 420 mm wide, 85 mm high and 15 mm thick. A wooden board 40 mm long, 20 mm wide and thick is nailed to the four corners inside. Galvanized iron sheet or tarpaulin is nailed on the top. There are also two tongue-shaped vents about 100 mm long and 20 mm high on each side.

2. What is the appropriate temperature in the beehive?

1. In some places, the temperature is high, the queen bee will stop laying eggs, and there will be no bee larvae in the bee colony. But in some places, even if the temperature is high, the queen bee can still lay eggs, and there will be larvae in the bee colony. Therefore, the suitable temperature of the beehive needs to be determined according to the actual situation of the bee colony.

2. In a bee colony with larvae, the central temperature of the colony remains basically unchanged, approximately between 34.4°C and 34.8°C. The temperature where there are young bees generally remains between 32-35°C. In the periphery of the hive where there are no bee larvae, the temperature generally remains above 20°C.

3. When there are no larvae in the bee colony, temperature control is generally not strict. At this time, the temperature of the bee colony will generally change with the external temperature and will generally be maintained between 14-32°C.