1. How to breed red worms?Step/Method 1 Pool and density: When breeding red worms artificially, the number is generally large, and it is very common to breed them on a large scale. The first thing to pay attention to is the breeding pool and density. You can use a cement pool to breed red worms. The depth of the water can be controlled at 20-30 cm. It does not need to be too deep. Some silt can be placed at the bottom of the pool. The number of red worms should not be too large, otherwise the dissolved oxygen in the water will be insufficient, and there will be insufficient food. Step/Method 2 Food: There are many kinds of food that red worms can eat. Some red worms only eat meat, while others are omnivorous and can eat both meat and vegetables. Even some bacteria can become their food. If you are breeding red worms artificially, you can also add some glucose to the water, which will help the red worms grow better. Step/Method 3 Water temperature: When breeding red worms, you need to pay special attention to the water temperature, because the water temperature has a relatively large impact on the growth and development of red worms. Red worms are more afraid of heat, but not too afraid of cold, so it can be kept at around 10 degrees, or even more than 10 degrees. When the temperature is suitable, the growth and reproduction speed of red worms are relatively fast. Step/Method 4 Water change: When breeding red worms, you must pay attention to water changes, otherwise the water quality will be poor and the dissolved oxygen content will be insufficient. The specific frequency of water changes can be determined according to the state of the water in the pool, and the water quality in the pool can be monitored in real time. Step/Method 5 Light: Red worms don't like strong light, so try to keep the pool darker. If there is strong light during the day, it is recommended to cover it in time. 2. How to breed red worms?Step/Method 1 When breeding red worms, prepare a glass container, put the selected red worms into it, and then inject clean and sterile natural water. If you want to use tap water for breeding, it is best to expose the tap water to the sun for 2-3 days to remove the chlorine in it to prevent poor growth of the red worms. Step/Method 2 Control light source The growth of red worms cannot be separated from light. Lack of light source will cause the red worms to have difficulty breathing and suffocate to death. When breeding, it is best to hang a 5-watt light bulb above the container to provide the red worms with sufficient light, allowing them to breathe freely and grow healthily. Step/Method 3 Water quality control When breeding red worms, the water should be changed once a day to keep the water clean. In the process of changing the water, the red worms and the container should be cleaned to remove the mucus to avoid the breeding of bacteria. The breeding water depth should be controlled at about 3-5 cm, and the water level should be deepened at night to keep warm. Step/Method 4 Feeding. Red worms mainly feed on organic debris in the soil, and they particularly like sweet and acidic baits. Poultry manure, domestic sewage, etc. are all their baits. In professional farms, rice bran, sawdust, sludge, pigeon manure and other raw materials are generally fermented to make feed. If it is a family farm, yeast powder can be soaked in water and fed. Feeding is also a key point in red worm production. Feeding in small amounts and multiple times can increase production. Generally, feeding is done once every 3-4 days, and 50 to 100 kilograms of manure is fed per mu each time. It is mixed with water and sprinkled throughout the pond. When feeding, pay attention to the amount of residual bait, and do not blindly feed more, so as to avoid excessive organic matter in the water body causing fermentation to produce toxic substances, affecting production. 3. What is the correct way to feed red worms?Environment: It is advisable to choose a cool and humid environment, and the density of red worms should not be too high. Water source: Red worms are afraid of pungent odors. If they are raised with tap water, they must be exposed to the sun for a few days to remove the chlorine. Cleaning: Clean the breeding pots and dead red worms in time to keep the red worm breeding pots clean. Feeding: Glucose can be used directly for feeding, two or three times a week 4. Tips for raising red worms?1. Red worm collection Red worms like to live in fertile water with slow water flow, and the water depth is generally about 0.5 meters. Every year in late spring and early autumn, it is the season for red worms to reproduce in large numbers. Red worms float on the water surface, often making the water surface brown-red, and people can easily find them. Red worms can be collected all year round in southern my country, and they are easier to collect in spring and autumn. Before collecting, prepare the collection net and cover the net mouth with a layer of plastic green yarn. The mesh of the green yarn is just enough for the red worms to pass through. In this way, when collecting, it can prevent water plants and other debris from entering the net. 2. Container selection It is best to use a container with a larger area in contact with the air, because the red worms will float to the water surface and make breathing-like movements, so if there are too many of them, some of them may not be able to compete for a position and die. 3. Change the water When breeding a small number of bloodworms at home, you can take the river pond sludge together with the bloodworms and put them in a basin or glass container. It is best to soak them with river water. If you use tap water for breeding, you should dry the tap water for 2 to 3 days in advance to remove impurities. Change the water every other day. 4. Rinse First, you need to wash the basin. Every time you change the water, after pouring the insects into the sieve, you need to clean the basin with clean water. At this time, there will be some sticky mucus on the basin, which makes it sticky. Wash all of this off and rinse the basin clean. Second, you need to wash the insects. Take some water from the basin and rinse the insects in the sieve with water to wash off the mucus and dirt on the insects. 5. Feeding Specialized farms mostly ferment rice bran, sawdust, banana peels, bagasse, sludge, pigeon droppings, etc. to make feed. For home-breeding red worms, you can feed them with yeast powder soaked in water, but the amount must be controlled. 6. Harvesting and storage When the number of red worms increases, they should be collected in time and dried for storage. You can wash the red worms and put them in a wet cloth, then put them in a clean disposable lunch box and put them in a dark and ventilated place at home (shady balcony). Basically, you can take them out every one or two days to rinse them with water and sieve out dead worms, and you can keep them for a month or so. 5. What is the best way to raise red worms?1. Breeding conditions: Red worms like to live in micro-flowing fertile water. Artificial breeding must meet this condition. They will reproduce in large numbers in late spring and early autumn. They must be collected in containers. It is best to raise them with natural water and take anti-cold measures when the temperature is low. 2. Control the light source: Red worms like light, so the lights should not be turned off at night, otherwise they will easily die. 3. Water quality control: The water level can be slightly shallower during the day to increase the water temperature, and the water level can be deepened at night. 4. Feeding bait: Ferment rice bran, silt, pigeon droppings, sawdust, etc. into feed. 6. Red worm breeding technology?1. Breeding conditions: To breed red worms, prepare a glass container, then put red worms and unpolluted natural water into it. 2. Control the light source: Hang a 5-watt bulb above the container to provide 24 hours of light for the red worms every day. 3. Water quality control: Change the water once a day and clean the bloodworms and mucus on the utensils. 7. How to raise red worms?To raise red worms, you must first collect them and then prepare the breeding containers. During the breeding process, you must do a good job of water quality management, light source control, feed feeding, etc. When the number of red worms increases, you must harvest them in time and dry them. 1. Red worm collection Red worms like to live in fertile water with slow flow. Late spring and early autumn every year is the season when red worms reproduce in large numbers. They float on the water surface, often making the water surface brown-red. This is a great opportunity for us to collect red worms. 2. Cultivation vessels When raising a small amount of bloodworms at home, you can take the river pond sludge together with the bloodworms and put them in a basin or glass container. It is best to soak them in river water. If you use tap water for breeding, you should dry the tap water for 2 to 3 days in advance to remove bleach and other substances. Change the water every other day. In winter, you need to prevent freezing and put a wet red cloth on the container to keep it moist. It is best to use a container with a large area of contact with air, because the bloodworms will float to the surface of the water and have a breathing-like movement, so if there are a lot of them, some of them may not be able to compete for a position and die. 3. Light source control A light source is necessary for raising red worms, and the light source cannot be turned off at night. You can use a small light source (such as a 5-watt night light, etc.) at night, because red worms are too lazy to breathe, and if there is no light source, they will easily die the next day. 4. Feeding Most large-scale professional red worm farms use rice bran, sawdust, banana peels, bagasse, sludge, pigeon manure, etc. to ferment and make them into breeding feed. Home-based red worm breeding can use yeast powder soaked in water to feed, but the amount must be controlled. 5. Harvest and Overwintering When the number of red worms increases, they should be collected and dried in time. In late autumn and winter, the reproduction capacity of red worms is greatly weakened. When you can't see the red worms in the water tank, don't pour out the water in the tank, because they are hiding in the green algae. You can put the water tank in a sunny room or near the radiator. In spring, when the indoor temperature rises, the red worms come out again. When the room temperature rises above 28℃, the red worms begin to reproduce in large numbers. 8. What are the breeding techniques for red worms?1. Breeding pond: Bloodworm breeding is generally carried out on a large scale, so a breeding pond is needed. The number of bloodworms to be put in can be determined by the size of the breeding pond, and the water depth. When breeding bloodworms, the water should not be too deep. Generally speaking, 20 to 30 centimeters is more appropriate. In addition, some silt needs to be placed at the bottom of the pond, where bloodworms like to move around. 2. Food: The main food of red worms is plankton and organic debris in the water. When the water is rich in nutrients, the growth rate of red worms will be fast. Therefore, it is best to add some fermented fertilizer to the water regularly, so that the nutrients in the water will be richer. 3. Water quality: It is more appropriate to use river water or pond water to breed red worms, because such water is closer to the native environment of red worms, but tap water is more convenient. But don't use tap water directly. It is best to expose them to the sun for two or three days and wait until the chlorine in them is basically removed before using them. Red worms do not have high requirements for water quality, but water quality is closely related to dissolved oxygen, so water changes must also be done well. 9. How to raise red worms?1. Prepare a suitable container Before breeding red worms, you need to prepare a suitable container. The size of the container can be determined based on the number of red worms to be bred, the size of the location where they are placed, and other factors. Generally, glass or plastic containers can be used, and they must be watertight and have a large area in contact with the air. 2. Provide good water quality Red worms are afraid of pungent smells. If you use tap water for breeding, we all know that tap water contains chlorine, which will affect the growth of red worms. Therefore, before using tap water, you need to expose it to the sun for a few days to eliminate chlorine and impurities. In rural areas, clean and clear river water or stream water can be used. Change the water every other day to keep the water quality good. 3. Keep the environment moist The environment for raising red worms must be kept moist, and the breeding container must be placed in a cool place, or covered with a piece of cloth soaked in water. 4. Provide lighting conditions Light source is a necessary condition for raising red worms. Provide continuous light source to maintain the life activities of the red worms. Remember not to place them in a dark room. 5. Clean and feed frequently In the process of breeding red worms, it is necessary to clean the feeding utensils in time, keep the red worms clean, and pick out the dead red worms in time, because the dead red worms emit a strong pungent smell. A small amount of domestic red worms can be fed directly with glucose, usually a few milliliters, and fed 2-3 times a week. For large-scale red worm breeding, rice bran, sawdust, banana peels, sugarcane bagasse, sludge, pigeon manure, etc. can be fermented and made into nutrients for their absorption. |
>>: CATDOLL: How to sell farmed snails (How to sell farmed snails)
Chitin and chitosan can be extracted from the ski...
1. How to raise earthworms with cow dung? First, ...
1. How to raise earthworms at home? 1. Container:...
1. When are clams at their largest? The clams are...
Understanding the Importance of Calf Selection If...
Raising chickens is a hobby for many people and i...
Causes of potassium deficiency in pigs Potassium ...
Premixes are widely used in livestock and poultry...
1. What is the best way to raise red worms? 1. Br...
1. Will maggot powder used in aquatic feed pollut...
1. Can transparent plastic boxes raise ants? Tran...
How much does a 3-pound alligator snapping turtle...
How to raise squid??? First, you need to buy all ...
1. Is it suitable for children to raise silkworms...
Although the shells of oysters are very strong, t...