CATDOLL : CATDOLL: How to maintain red worms best (How to maintain red worms best)

1. What is the simplest way to raise red worms?

1. Pool and density: When breeding red worms artificially, the number is generally large, and breeding them on a large scale is very common. The first thing to pay attention to is the breeding pool and density. You can use a cement pool to breed red worms. The water depth can be controlled at 20-30 cm. It does not need to be too deep. Some silt can be placed at the bottom of the pool. The number of red worms should not be too large, otherwise the dissolved oxygen in the water will be insufficient, and there will be insufficient food.

2. Food: There are many kinds of food that red worms can eat. Some red worms only eat meat, while others are omnivorous and can eat both meat and vegetarian food. Even some bacteria can become their food. If you are breeding red worms artificially, you can also add some glucose to the water, which will help the red worms grow better.

3. Water temperature: When breeding red worms, you need to pay special attention to the water temperature, because the water temperature has a relatively large impact on the growth and development of red worms. Red worms are more afraid of heat, but not too afraid of cold, so the water temperature can be kept at around 10 degrees, or even more than 10 degrees. When the temperature is suitable, the growth and reproduction speed of red worms are relatively fast.

4. Water change: When breeding red worms, you must pay attention to water changes, otherwise the water quality will be poor and the dissolved oxygen content will be insufficient. The specific frequency of water changes can be determined according to the state of the water in the pool, and the water quality in the pool can be monitored in real time.

5. Light: Red worms do not like strong light, so try to keep the pool in a darker state. If there is strong light during the day, it is recommended to cover it in time.

2. What is the easiest way to raise red worms?

Step/Method 1

When breeding red worms, prepare a glass container, put the selected red worms into it, and then inject clean and sterile natural water. If you want to use tap water for breeding, it is best to expose the tap water to the sun for 2-3 days to remove the chlorine in it to prevent poor growth of the red worms.

Step/Method 2

Control light source

The growth of red worms cannot be separated from light. Lack of light source will cause the red worms to have difficulty breathing and suffocate to death. When breeding, it is best to hang a 5-watt light bulb above the container to provide the red worms with sufficient light, allowing them to breathe freely and grow healthily.

Step/Method 3

During the process of breeding red worms, the water quality should be changed once a day to keep the water clean. In the process of changing the water, the red worms and the container should be cleaned to remove the mucus to avoid the breeding of bacteria. The breeding water depth should be controlled at about 3-5 cm, and the water level should be deepened at night to keep warm.

Step/Method 4

Feeding. Red worms mainly feed on organic debris in the soil, and they particularly like sweet and acidic baits. Poultry manure, domestic sewage, etc. are all their baits. In professional farms, rice bran, sawdust, sludge, pigeon manure and other raw materials are generally fermented to make feed. If it is a family farm, yeast powder can be soaked in water and fed. Feeding is also a key point in red worm production. Feeding in small amounts and multiple times can increase production. Generally, feeding is done once every 3-4 days, and 50 to 100 kilograms of manure is fed per mu each time. It is mixed with water and sprinkled throughout the pond. When feeding, pay attention to the amount of residual bait, and do not blindly feed more, so as to avoid excessive organic matter in the water body causing fermentation to produce toxic substances, affecting production.

3. What is the best way to raise red worms for fish to eat?

How to cultivate bloodworms for fish feeding:

1. Red worms like to live in fertile water with slow flow. Late spring and early autumn every year is the season when red worms reproduce in large numbers. They float on the water surface, often making the water surface brown-red. This is an excellent opportunity to collect red worms.

2. When breeding a small amount of bloodworms at home, you can take the river pond sludge together with the bloodworms and put them in a basin or glass container. It is best to soak them with river water. If you use tap water for breeding, you should dry the tap water for 2 to 3 days in advance to remove bleach and other substances. Change the water every other day. In winter, you need to prevent freezing and put a wet red cloth on the container to keep it moist.

3. It is best to use a container with a larger area in contact with the air, because the red worms will float to the water surface and make breathing-like movements, so if there are too many of them, some of them may not be able to compete for a position and die.

4. Light source is necessary for raising red worms. The light source cannot be turned off at night. You can use a small light source (such as a 5w night light, etc.) at night. Because red worms are too lazy to breathe, if there is no light source, they will die easily the next day.

5. There are specialized breeding farms, most of which ferment rice bran, sawdust, banana peels, bagasse, sludge, pigeon droppings, etc. to make breeding feed. For home breeding of red worms, you can use yeast powder soaked in water to feed them, but the amount must be controlled.

6. When the number of red worms increases, they should be collected and dried in time. In late autumn and winter, the reproduction capacity of red worms is greatly weakened. In winter, when you can't see the red worms in the water tank, don't pour out the water in the tank, because they are hiding in the green algae. You can put the water tank in a sunny room or near the radiator. In spring, when the indoor temperature rises, the red worms come out again. When the room temperature rises to above 28℃, the red worms begin to reproduce in large numbers.

4. What is the best way to preserve red worms?

1. Simple cultivation method

Red worms live in a humid environment and can survive even if they don't eat for a day or two. Therefore, as long as the temperature and environment are suitable, it is easy to preserve red worms. A simple culture method is to use wet gauze or towels to gently wrap the red worms, ensure that the living environment of the red worms is moist, and place them in a shaded and cool place. Generally speaking, this method can preserve red worms for one to two days without any problem.

2. Soil maintenance method

If you want to preserve it for a longer time, you need to improve the environment and make some improvements to the environment suitable for the red worms. For example, you can use soil to preserve the red worms. The nutrients and water in the soil can provide nutrition and a suitable environment for the fish. The soil can also insulate the fish from heat and wind, allowing the red worms to stay in a damp and dark place for a long time.

3. Low temperature preservation method

Red worms are afraid of heat, so when storing them, you should pay attention to the temperature of the red worms. Generally, put the unused red worms in a glass or ceramic stainless steel container, add a little clean water, and then put them in the refrigerator. Change the water every one or two days and clean up the dead red worms. This way, they can be stored for a longer time and the activity of the red worms can be guaranteed.

5. What is the best way to raise red worms?

1. Breeding conditions: Red worms like to live in micro-flowing fertile water. Artificial breeding must meet this condition. They will reproduce in large numbers in late spring and early autumn. They must be collected in containers. It is best to raise them with natural water and take anti-cold measures when the temperature is low.

2. Control the light source: Red worms like light, so the lights should not be turned off at night, otherwise they will easily die.

3. Water quality control: The water level can be slightly shallower during the day to increase the water temperature, and the water level can be deepened at night.

4. Feeding bait: Ferment rice bran, silt, pigeon droppings, sawdust, etc. into feed.

6. How to raise red worms?

In the process of artificial breeding, the water depth is generally maintained at about three to five centimeters. Especially in spring, when artificial breeding is carried out, the water level can be slightly lowered. This method can effectively increase the water temperature. Deepening the water level at night can effectively keep warm.

Fertile water with a steady flow can allow red worms to reproduce in large numbers. At this time, you can place the silt and red worms together in a clean glass container and use some natural pure water for breeding. If you want to use tap water for breeding, you must place them under sunlight for two or three days before using them as reasonable breeding water. Change the water in time every day and take some very good warming measures.

Red worms mainly eat organic fertilizers and like some sour and sweet feeds. Generally, they need to be fed once every three days. One mu of land should be fertilized with more than 50 kg of fertilizer each time, and a certain amount of water should be added, and then sprinkled after sufficient stirring.

7. How to raise red worms?

Red worms, also known as water earthworms, are actually the larvae of chironomids. They live in river and pond sludge, but require flowing and clean water. Red worms are the best bait for fish, containing high protein. They are also one of the popular foods on foreign tables in recent years, comparable to snails. There are specialized breeding farms. Rice bran, sawdust, banana peels, sugarcane bagasse, silt, pigeon manure, etc. are often fermented to make breeding feed. When breeding a small amount of red worms at home, the river and pond sludge can be taken back together with the worm species and placed in a clay pot or glass container. It is best to soak them with river water. If tap water is used for breeding, tap water should be placed in a large basin for 2-3 days in advance to remove bleaching powder and other substances before use. Change the water every other day. (You can also store the container in the refrigerator). When using, take as much as you need, put it on a clean, moist red cloth. In winter, it should be protected from freezing and placed in a box for heat preservation. If you spray it with wine, the shelf life can be extended, but it cannot be bred again and must not be put back into the original breeding basin.