CATDOLL : CATDOLL: Small bloodworm fishing equipment? What equipment is needed to catch eel fry?

1. Small red worm fishing equipment?

Use a large mesh net to catch.

To catch red worms, you need to use a 140-mesh sieve to remove the mud from the pond and take the red worms out of the sieve (not all ponds have red worms). Female worms live in shallow mud all year round, so they are easier to catch. Male worms live in deeper mud, and on April 20 every year, they will be hard to catch when they burrow into the mud about 1 meter deep.

There are male and female red worms. Male worms cannot be used to feed smaller tropical fish. Female worms can be used to feed various ornamental fish, and can be used to make nests or tied for fishing.

2. What equipment is needed to catch eel fry?

All you need to prepare is a net, a bucket, and water pants.

Large-scale fishing of eel fry uses fixed nets. Most of the time, the nets are set in wider and deeper rivers or at the seaside at night when the tide is high, so that the eels enter the nets with the water flow. Generally, eels are caught at night when the tide is high. Fixed nets have a high yield, but there are many dead fry, miscellaneous fish and garbage. If a fry collection box that can float up and down with the water flow is connected to the tail end, the eel fry can be caught in time, and the survival rate will increase.

3. How about Anhui Conch Kawasaki Energy Saving Equipment Manufacturing Co., Ltd.?

Anhui Conch Kawasaki Equipment Manufacturing Co., Ltd., formerly known as Anhui Conch Mechanical and Electrical Equipment Co., Ltd., was established in May 1997 and is a subsidiary of Anhui Conch Cement Co., Ltd. In August 2009, the company successfully reorganized its joint venture with Japan's Kawasaki Plant Engineering Co., Ltd. and became a Sino-Japanese joint venture.

In July 2006, Conch Group actively implemented the country's "Several Opinions on Accelerating the Revitalization of the Equipment Manufacturing Industry" and invested approximately RMB 330 million to relocate and rebuild the company's cement equipment and spare parts processing center. The new company officially started construction in March 2007 and officially started trial production in August of the following year. The main business scope has been expanded to include wear-resistant parts surfacing, auxiliary equipment manufacturing, motor repair and large equipment component repair, and metal processing.

In August 2009, the company successfully restructured its joint venture with Kawasaki Plant Engineering Co., Ltd. of Japan, introduced advanced technology and excellent management mode, and expanded its production scope to main equipment of cement production line. It has been involved in the production of 5500t/d cement clinker preheater, CP and PLOYSIUS grate cooler parts. In the first half of 2010, the development of large roller press was completed. The development of overseas project 3500t/d cement clinker preheater is underway. In November 2009, the company was recognized as a "high-tech enterprise" by Anhui Provincial Science and Technology Department.

The company is located in Huolonggang Town, Yijiang District, Wuhu City. It is adjacent to the Yangtze River in the north, National Highway 205 in the east, and Wuhu Port of the Yangtze River and Zhujiaqiao Foreign Trade Terminal in the west. It has very convenient water and land transportation. The company has three modern factory buildings with a construction area of ​​50,458m2. At present, the company's total assets have reached 200 million yuan, with 38 sets of cladding tooling automatic welding machines, electric melting and explosion heating furnaces, etc.; 27 sets of main and auxiliary machine manufacturing equipment such as CNC flame cutting machines, plate rolling machines, shearing machines, bending machines, pipe bending machines, single-point closed presses, etc.; 20 sets of metal processing equipment such as turning, milling, planing, grinding, and boring; motor repair equipment large four-column universal presses, large and medium-sized drying rooms, dynamic balancing test machines, automatic winding machines, etc.; more than 20 medium and large metal processing CNC equipment are being added one after another.

The company consists of seven secondary management departments, namely, the Management Department, the Finance Department, the Project Department, the Technology Department, the Quality Control Department, the Purchasing Department and the Manufacturing Department. It currently has nearly 300 employees, including 6 Japanese experts, 75 technicians and 25 managers. The company's people-oriented management philosophy, broad talent development space and remarkable performance have attracted a large number of college and technical school graduates and professional and technical personnel with ideals and enthusiasm, bringing infinite vitality to the company.

The company is achieving rapid development at a vigorous pace. It will, as always, uphold the business purpose of "highest quality and most sincere service", continuously enhance its design and research and development capabilities, bring forth new products through the old, create high-quality products, provide satisfactory services, improve its corporate management system, and build the company into a first-class domestic cement equipment manufacturing base and stride towards the international market!

4. How about Anhui Conch Kawasaki Energy Saving Equipment Manufacturing Co., Ltd.?

Anhui Conch Kawasaki Equipment Manufacturing Co., Ltd., formerly known as Anhui Conch Mechanical and Electrical Equipment Co., Ltd., was established in May 1997 and is a subsidiary of Anhui Conch Cement Co., Ltd. In August 2009, the company successfully reorganized its joint venture with Japan's Kawasaki Plant Engineering Co., Ltd. and became a Sino-Japanese joint venture.

In July 2006, Conch Group actively implemented the country's "Several Opinions on Accelerating the Revitalization of the Equipment Manufacturing Industry" and invested approximately RMB 330 million to relocate and rebuild the company's cement equipment and spare parts processing center. The new company officially started construction in March 2007 and officially started trial production in August of the following year. The main business scope has been expanded to include wear-resistant parts surfacing, auxiliary equipment manufacturing, motor repair and large equipment component repair, and metal processing.

In August 2009, the company successfully restructured its joint venture with Kawasaki Plant Engineering Co., Ltd. of Japan, introduced advanced technology and excellent management mode, and expanded its production scope to main equipment of cement production line. It has been involved in the production of 5500t/d cement clinker preheater, CP and PLOYSIUS grate cooler parts. In the first half of 2010, the development of large roller press was completed. The development of overseas project 3500t/d cement clinker preheater is underway. In November 2009, the company was recognized as a "high-tech enterprise" by Anhui Provincial Science and Technology Department.

The company is located in Huolonggang Town, Yijiang District, Wuhu City. It is adjacent to the Yangtze River in the north, National Highway 205 in the east, and Wuhu Port of the Yangtze River and Zhujiaqiao Foreign Trade Terminal in the west. It has very convenient water and land transportation. The company has three modern factory buildings with a construction area of ​​50,458m2. At present, the company's total assets have reached 200 million yuan, with 38 sets of cladding tooling automatic welding machines, electric melting and explosion heating furnaces, etc.; 27 sets of main and auxiliary machine manufacturing equipment such as CNC flame cutting machines, plate rolling machines, shearing machines, bending machines, pipe bending machines, single-point closed presses, etc.; 20 sets of metal processing equipment such as turning, milling, planing, grinding, and boring; motor repair equipment large four-column universal presses, large and medium-sized drying rooms, dynamic balancing test machines, automatic winding machines, etc.; more than 20 medium and large metal processing CNC equipment are being added one after another.

The company consists of seven secondary management departments, namely, the Management Department, the Finance Department, the Project Department, the Technology Department, the Quality Control Department, the Purchasing Department and the Manufacturing Department. It currently has nearly 300 employees, including 6 Japanese experts, 75 technicians and 25 managers. The company's people-oriented management philosophy, broad talent development space and remarkable performance have attracted a large number of college and technical school graduates and professional and technical personnel with ideals and enthusiasm, bringing infinite vitality to the company.

The company is achieving rapid development at a vigorous pace. It will, as always, uphold the business purpose of "highest quality and most sincere service", continuously enhance its design and research and development capabilities, bring forth new products through the old, create high-quality products, provide satisfactory services, improve its corporate management system, and build the company into a first-class domestic cement equipment manufacturing base and stride towards the international market!